Plastic Model Mojo

A Mighty Eighth Air Force book is on the table, but we’re not doing a “click and win” giveaway. We want something that makes the show better for everyone: your best Shop Talk topic ideas and your sharpest questions for the Wheel of Accidental Wisdom. Mike and Kentucky Dave start with a laid back Fourth of July catch up, from road weariness to the kind of heat that makes even a pool feel too warm....

We settle into a laid-back holiday catch-up, swap a few vacation highlights, and revisit that specific kind of nostalgia that comes from remembering long-gone hobby shops and the stuff we bought there. Then we look ahead to July with two feature episodes on the calendar, including a shop talk segment, plus a Nationals run-up as IPMS Nationals gets closer. If you like plastic model building podcast...

A tiny paint question can turn into a big lesson about how the hobby actually works. We start with the everyday reality of scale modeling: reorganizing the model room, fighting distractions, and trying to protect bench time while life keeps piling on. Then we jump into listener mail that gets surprisingly deep, including how to choose an olive drab or Marine green for a Pacific Theater Sherman in...

A hobby can feel timeless right up until the moment it changes under your hands. We start with the real-world catch up: Wonderfest, the sprint toward the IPMS Nationals in Fort Wayne, and the listener mail that reminds us why this community is so strong. Along the way we share show intel, a clever “Squadron Catalog Challenge” idea, and what one contest recap teaches about entry growth, online regi...

You can feel when a Nationals is being built with real intention and Fort Wayne is making that case early. We sit down with John Figueroa, chair of the 2026 IPMS USA National Convention, and treasurer Dave Mason to get the behind-the-scenes look at what’s coming to the Grand Wayne Convention Center in downtown Fort Wayne, Indiana, August 5 through 8. The big headline: they’re not doing this with o...

We get real about the behind-the-scenes side of running a scale modeling podcast. May hit us with health issues, a car that refused to make the trip, and the kind of production chaos that throws schedules off. We lay out what June should look like, what we’ve already recorded, and how we’re planning to get feature episodes and shorts back on track as we head toward bigger events like the IPMS Nati...

A hobby can be the best kind of escape until your workspace fights you, your calendar fills up, and the internet decides a vague press blurb means the sky is falling. We start with what’s been happening at our own benches, including Dave’s push to overhaul a hobby room that has somehow become “anti-modeling,” plus a listener-recommended project tracking app that could genuinely help builders log p...

Something big is happening in scale modeling, and you can feel it in the way builders talk about 3D printing, new subjects, and the shows that are turning into true hobby meetups. We sit down with Brandon Lowe from Squadron to get a grounded look at what it takes to turn a cool idea into a real 3D printed model kit you can buy, build, paint, and display with pride.  We talk through two attention-g...

We zoom out to the bigger modeling hobby community. We recap our trip to the AMPS International Convention in South Bend, Indiana, from standout vendors to the simple joy of photographing great models without hovering too close with a phone. We also look ahead to Wonderfest at the end of May, including the added buzz around the 60th anniversary of Star Trek and what that could mean for sci-fi mode...

Two model shows, two very different philosophies, one shared goal: make the scale modeling hobby feel bigger than your workbench. We’re in the thick of show season, and we’re shining a light on events that are actively evolving what a great model show can be for builders, vendors, and first-timers who just want to learn and meet people. First up is SilverCon in Sacramento, California, hosted by IP...

Your bench time is precious, so when something starts sabotaging it, like CA glue fumes wrecking your sinuses or a half-finished kit stalling for months, we want fixes that actually work. After two big shows in three weeks, we finally do some much-needed housekeeping and burn down a mountain of listener mail with the kind of practical advice you can put to work immediately. We dig deep into cyanoa...

He beat a brutal stretch of chemo, got the all-clear, then asked the question every craftsperson quietly fears: do the hands and the mind still work the same way? Our friend Ed Bareth is back, and he’s turning that question into plastic, paint, and proof with a 1/32 Trumpeter Douglas SBD-5 Dauntless built for awards-level judging. We dig into what “national quality” really demands in large scale m...

Staring at a perfectly organized workbench and still not touching plastic is a special kind of frustration. A listener writes to us after a 30 year break from scale modeling, and the problem is not motivation, it is overload: canopy masks, weathering trends, endless paint lines, 3D printing, and YouTube builds that look like museum pieces. We get it, and we map out how to start again without letti...

We’re back from HeritageCon feeling the best kind of tired, the kind you earn after a weekend packed with great people, hobby shop stops, and a contest floor full of inspiration. We share highlights from the trip, what stood out about the quality and sheer volume of models, and why getting to an event in person can put real mojo back in your modeling. April is upon us, and we’re looking ahead to t...

A simple lunch-break experiment turns into a genuine “wait, what just happened?” moment: we take AI prompting seriously, generate photorealistic figure concepts for a WWII Eastern Front diorama, and push that workflow toward a printable 3D result. The speed is exciting, the pitfalls are real, and the implications for scale modeling feel closer than most people think. We talk through what worked, w...

April is stacked with model shows, but not all scale model contests feel the same once you walk into the room. We line up three very different events and get into the details that actually matter when you’re deciding where to spend a Saturday: when doors open, when registration closes, what judging looks like, how strong the vendor room is, and what you can do while the judges are working. First s...

An AI prompt that becomes a real scale figure you can hold in your hand sounds like science fiction, but the gap just got a lot smaller. We sit down with returning guest Jake McKee to walk through the exact, messy, real-world workflow he is using right now to create custom 3D printed figures for a diorama, starting with an AI-generated photoreal image and ending with a printable STL. We dig into w...

Ready to watch text turn into tiny people you can actually paint? We kick off March with big plans, bigger shows, and a hands-on look at a workflow that converts AI prompts into resin-ready 3D figures for your next diorama. It started with a listener asking how to crowd a Union Pacific Big Boy display, and it grew into a full pipeline: prompt, generate, refine, export, print, and paint.  Beyond th...

When the days are short and the bench time is shorter, what keeps us building? We open the studio door on a fast, funny, and honest ride through the parts of scale modeling that actually matter: a workspace that invites you to sit down, a ritual that signals “now we create,” and a community that shows up when motivation dips. The mailbag sets the tone—digital galleries that make old builds new aga...

The Model Show Spotlight is brought to you by The World of Armor! A flying Lancaster overhead, rows of models below, and a sold‑out vendor hall buzzing with deals— HeritageCon 2026 is set to deliver a full‑throttle modeling day inside the Canadian Warplane Heritage Museum . We sit down with the new coordination team to share what’s changing, what’s staying great, and how to lock in your spot befor...

Ever stalled on a “dream build” because you’re afraid to mess it up? We went straight at those fear targets—perfectionism, PE jitters, bare‑metal dread, and the myth that pros are “just fast”—and came back with practical fixes that make the bench fun again. Kicked off by a wave of listener mail, we connect the dots between honest expectations and real skill barriers, then show how to shrink both:...

Snow may slow travel, but the calendar is heating up. We swap plans and call out standout events across the map, including BlizzCon in Columbus, AMPS Atlanta, 4M Mayhem in Michigan, Rochester’s Hope It Don’t Snow, and the Old Dominion Open in Richmond. For planning and entries, IPMSUSA.org remains the essential resource, with listings that stretch well into spring. That rhythm—research, build, sho...

What happens when the hobby you love starts feeling like a chore? We go straight at that question with Jim Bates, exploring how burnout creeps in, why favorite subjects can become fear targets, and what it takes to rediscover honest joy at the bench. Jim shares how a demanding year pushed modeling to the margins, why armor felt freer than aircraft, and the simple mindset shift that turned “perfect...

A snowbound Kentucky chat meets sunny Jacksonville plans as we sit down with Bob Tate from IPMS First Coast to explore how JaxCon reshaped the classic model show into a warm, community-first experience. Think Friday evening setup and a pizza social to slow the pace, then a crisp Saturday run with registration at 9, judging at noon, and a focused awards wrap by 5. It’s efficient, friendly, and desi...

A storm with a name is bearing down on the Ohio Valley and mid-south, and that changed everything. We hit record to get a clear, direct update out fast: Winter Blitz moves to Saturday, February 28, 2026. Same venue, same plan, just smarter timing so no one risks a long drive on icy roads. Consider it a bonus window to finish your build, refine that finish, or finally try the stencil set that’s bee...