OnTrack: The PCB Design Podcast

Renesas GreenPAK chips are configured, not programmed, and the free Go Configure Software Hub is where you do it. Roman Yankevych, senior product marketing manager at Renesas, walks Zach Peterson through the redesigned hub and the GreenPAK Designer features that most engineers never stumble onto.  Working from the SLG46826 window comparator example, he turns tangled wires into net labels, runs the...

PCB connectors for military, aerospace, and LEO satellite hardware have to survive shock, vibration, humidity, and hundreds of brutal thermal cycles, and Samtec field applications engineer Shane Dabrowski explains how they're proven to do it. Zach Peterson and Shane walk through Samtec's Severe Environment Testing built around VITA 47, lot-based MIL-DTL-55302 testing, and why solder joint fracture...

Altium's acquisition of Duro brings cloud-based PLM software built for hardware startups and small engineering teams into the Altium platform, and in this OnTrack Podcast episode Zach Peterson asks Duro founder and CEO Michael Corr why the deal happened. Michael walks through how the Altium Designer plugin publishes library parts and full projects into Duro with part numbers, revision status, and...

PCB grounding mistakes rarely start with the designer; they start in the datasheet, the app note, and the reference design that gets copied straight into production. On this episode of the Altium OnTrack Podcast, Zach Peterson talks with Dan Beeker, president of System Solution Specialists, about split grounds, mislabeled ground pins, and leftover ferrites that turn evaluation-board shortcuts into...

AI PCB routing only works when the tool understands your design intent, and in this OnTrack Podcast episode Zach Peterson sits down with Alain-Sam Cohen and Nabil Chouba of InstaDeep's DeepPCB to find out what that actually takes. They explain why classic autorouters fail on configuration rather than on routing, how a reinforcement-learning routing engine paired with Cooper, a natural-language orc...

PCB assembly mistakes rarely start on the factory floor; they start in layout, and in this OnTrack Podcast episode three assembly-side veterans explain exactly which ones keep showing up. Zach Peterson talks with Mike Buetow (PCEA), Chrys Shea (Shea Engineering), and Daniel Stanphill (Aurora Boardworks) about padstacks pulled off the internet, QFN footprints with no room for solder, datasheets tha...

Designing a custom power chip used to mean an ASIC budget and a year of NRE, but Renesas Power GreenPAK lets you configure one at your desk in minutes. In this OnTrack Podcast episode, host Zach Peterson talks with Sidney Chan, product marketing director in the Configurable Mixed Signal Division at Renesas, about how Power GreenPAK folds DC-DC converters, LDOs, and load switches into the same prog...

Marco Witzmann, Head of Requirements Portal at Altium, returns to the Altium OnTrack Podcast to show host Zach Peterson what the tool formerly known as Requirements Manager has become. In a live demo, Marco starts from a plain-language email about a wind-farm inspection drone and watches the new engineering assistant turn it into properly formulated requirements, complete with TBD placeholders ins...

Altium Develop brings the full Altium Designer experience — plus multi-board and harness design and cloud collaboration — to individual designers and small teams, without paying for enterprise features you'll never use: https://www.altium.com/develop?utm_source=youtube&utm_medium=video&utm_campaign=ontrack-podcast&utm_content=altium-is-coming-home-to-the-designer After 40 years as effe...

On this episode of the Altium OnTrack Podcast, host Zach Peterson talks with Ben Dannan, founder of Signal Edge Solutions and DesignCon Engineer of the Year, and Tyler Huddleston, SI/PI engineer, about a problem every high-speed designer knows too well: DDR compliance simulation that can take 24 hours to several days per interface. They walk through why the traditional Keysight ADS Memory Designer...

How does a region build a semiconductor and electronics workforce from the ground up? In this episode of the Altium OnTrack Podcast, host Zach Peterson sits down with Nasska Medrano, Global Program Manager at Altium Education, and Professor Johan Estrada of the Autonomous University of Yucatán (UADY) to unpack the Mayan-on-Chip initiative—a collaborative workforce development program training high...

In this episode of the Altium OnTrack Podcast, host Zach Peterson sits down with Rob Barton, Head of Platform API at Altium, for a deep dive into how programmatic access is transforming PCB design and electronics development. Rob traces the evolution of Altium's API—from the early disconnected SDKs and the launch of Nexar, through Octopart supply data, all the way to the new Platform API that expo...

Code-based PCB design is reshaping how engineers build hardware, and in this OnTrack Podcast episode, host Zach Peterson sits down with Ioannis Papamanoglou and Narayan Powderly, co-founders of atopile, to explore their code-first, AI-driven approach to PCB design. Drawing on backgrounds at Tesla and across the electronics industry, the founders explain why hardware has lagged behind software tool...

EMC testing is one of the toughest hurdles in PCB design, with industry pass rates often falling below 50% and every failure triggering expensive respins. In this OnTrack Podcast episode, host Zach Peterson sits down with Andy Eadie—owner of EMC FastPass and founder of Engentica—to unpack why so many products fail electromagnetic compatibility testing on the first attempt, and what designers can d...

Altium Develop unites your design, sourcing, and manufacturing teams in one cloud platform so EMC and layout problems get caught long before your board ever reaches the test house: https://www.altium.com/develop?utm_source=youtube&utm_medium=video&utm_campaign=ontrack-podcast&utm_content=70-of-pcbs-fail-emc-testing-and-ai-is-making-it-worse EMC testing failure rates are climbing toward...

Signal integrity engineers working on high-speed serial links, Ethernet, USB, PCI Express, and DDR memory interfaces need powerful simulation tools, but commercial software licenses can be cost-prohibitive. In this episode of the Altium OnTrack Podcast, host Zach Peterson sits down with David Banas, Solutions Engineer at Keysight, to explore three open-source Python packages that are transforming...

In this episode of the OnTrack Podcast, Zach Peterson sits down with Gabriel Guglielmi, VP of Global Product Management at Infinite Electronics, to explore one of the most disruptive shifts in electronics today: the rise of unmanned systems. From group one commercial drones to group five collaborative combat aircraft, Gabriel breaks down how the same revolution that transformed the space industry...

The PCB industry has long relied on manual microsectioning to verify board quality — but as densities increase and skilled labor becomes harder to retain, that process is breaking down. In this episode of the Altium OnTrack Podcast, host Zach Peterson welcomes back Geoffrey Leeds, founder of SCAN Labs, for his third appearance on the show. Geoffrey breaks down what he calls the "metrology gap" — t...

What does it take to design interconnects for AI data centers pushing 112G, 224G, and even 448G? In this episode of the Altium OnTrack Podcast, host Zach Peterson sits down with Matt Burns, Director of Technical Marketing at Samtec, to unpack how connector technology has evolved to meet the demands of modern high-speed systems. From co-packaged copper and optics to near-package interconnects, Matt...

What if you could parse your Altium project files from the command line, generate a full BOM in seconds, extract net lists as AI-readable JSON, and spin up a 3D HTML viewer with zero dependencies — all without ever opening Altium? In this episode of the OnTrack Podcast, host Zach Peterson sits down with Eli Hughes, principal at Wavenumber LLC, to dig into a suite of open-source tools he's built ar...

Is FPGA engineering the best career path for electronics engineers today? In this episode of the Altium OnTrack Podcast, host Zach Peterson sits down with Adam Taylor — founder of Adiuvo Engineering and the FPGA Horizons conference — to explore the full landscape of FPGA development. From how Adam accidentally fell into FPGAs as a new graduate to building one of the UK's most talked-about technica...

Altium Develop gives your entire team real-time visibility into PCB designs, supply chain data, and manufacturing feedback — so thermal and power decisions never get made in isolation: https://www.altium.com/develop?utm_source=youtube&utm_medium=video&utm_campaign=ontrack-podcast&utm_content=ipc-2221-vs-2152-the-truth-about-pcb-trace-current-ratings   If you've ever sized a PCB trace u...

Altium Develop gives your entire electronics team — engineers, procurement, and manufacturers — real-time visibility into your PCB designs and supply chain, all in one platform: https://www.altium.com/develop?utm_source=youtube&utm_medium=video&utm_campaign=ontrack-podcast&utm_content=greenpak-for-automotive-reliability-integration-real-world-demos Renesas' Automotive GreenPAK is a con...

In this episode of the Altium OnTrack Podcast, host Zach Peterson sits down with Stephen Newberry, Victor Kronberg, and Ching-Ping Wong from Chipletz — a fabless advanced packaging company pushing the boundaries of die-to-die interconnect technology. The team shares their background, their work on chiplet-based package design, and the technical paper they presented at DesignCon, which introduces t...

Altium Develop connects your entire electronics product team — from design to supply chain to manufacturing — in one unified platform: https://www.altium.com/develop?utm_source=youtube&utm_medium=video&utm_campaign=ontrack-podcast&utm_content=violet-labs-the-integration-hub-solving-hardware-data-chaos   Hardware engineering teams have long struggled with disconnected software tools — C...