Woodshop Life Podcast

Brians Questions: Love the show. Thanks for getting right to the questions. I have a project where I've made hundreds of the same item. Over that time, I've come up with a bunch of different jigs and processes that I've iterated over time to make things go faster and work better. I wonder if you have experience with and thoughts about how to approach this kind of woodworking-at-scale and if Huy in...

Brians Questions: Hey guys, thanks for answering all of my questions in the past. I have something a little different this time. While cutting a mortise on the router table into a leg, I accidentally touched the outside of the leg to the router bit and did some damage. I happen to have the offcut and the grain is a perfect match (see photo). What would be your process to go about repairing this so...

Brians Questions: I frequently work with dark wood, and need to mark the cuts.  Do you have a recommendation for a white pencil or pen that is fine tipped? Thank you for the great show and your time to produce it. -George What has been your favorite veneering project (or what project would you like to do with veneer) George Guys Questions: Hey guys, your recent talk about bandsaws made wonder if a...

Brians Questions: Hi guys! Long time listener, first time question-asker! Thanks very much for the show. I've been listening for a few years now and love the no-nonsense, down to business approach of your show. I am a hobby woodworker, but have begun to get a few paying projects, which have been really fun and rewarding. One of the things that has forced me to do, as opposed to  things I make for...

Brians Questions: Hello and greetings from Texas, I’m an amateur woodworker who may have bitten off a little more than I could chew. I started building full closet cabinets for my walk-in master closet, and at this point I’m too far in to turn back, so I’m learning as I go. All of the cabinet boxes are installed, and I’m now working on shelves and drawer fronts. My question is about face frames. I...

Brians Questions: I am getting ready to build a mission style entertainment center.  This project will use what I'm told is arched pedestal legs which was used a lot by Gustav Stickley.  I will be gluing up three 5 3/4"x 28" quarter sawn white oak blanks to make the legs.  I will then route the curve using a compression bit and template which I made using the Shaper Origin. My question is what are...

Guys Questions: I am going to be adding a 25/50 drum sander to my shop.  I can’t afford a powermatic so it is between the Jet and Laguna Supermax.  I went to AWFS this past year to see them in person and Jet was not at the show and Laguna only brought their large tools.  I called one of the nationwide woodworking stores that sells both brands and asked the employee which he thought was better and...

Brians Questions: My sister and brother-in-law would like to recruit/hire me to install/build built-in bank of drawers and shelves for them for their new home. The only relatable experience I have with this type of woodworking is building a face frame cabinet and constructing some under the bed drawer storage, each of which I have done exactly one time. The remainder of my woodworking experience h...

Brians Questions: ​Hello gentlemen, ​I love your podcast. I appreciate the care and detail you put into maintaining a consistent format and clean, listenable audio. Having been a radio production director in a former career, I loathe most podcast audio, so your effort to provide a professional listening experience is apparent. ​In my brief time as a woodworker, I’ve found it difficult to source ha...

Brians Questions: I currently have a Sawstop PCS 1.75, an 8” Laguna spiral head jointer, a Jet two-stage dust collector, a Laguna 1412 bandsaw, a Bosch cabinet style router table, a Dewalt DW734 lunchbox planer, an entry-level CNC, a Festool ETS125, a Festool dust extractor and various smaller power tools. I’m not particularly happy with the stability, adjustability and fence on my Bosch router ta...

Brians Questions: How do I take my woodworking skills to the next level, short of attending an expensive workshop? Up to this point most of what I've learned has been from either your podcast or YouTube videos (special thanks to Guy for all of his router table videos.) I have quite a few small projects under my belt, such as cutting boards, boxes, and a face frame cabinet. I'd like to move on to b...

Brian's Questions: Gentlemen, I thoroughly enjoy your podcast, so thank you for all that you do. What is you opinion on dog holes in the workbench? If you use them, how?  Include favorite accessories. Thank you again. Josh What is the best way to accurately put dog holes in your workbench without buying a $300 one time template tool? Josh Guy's Questions: Hi guys, Thanks for the awesome podcast, I...

This Episodes Questions: Brians Questions: Since my work typically uses traditional joinery, I cut a lot of tenons. I’ve tried all kinds of methods, but I am really looking for that one method that works for all size boards (cutting bedrail tenons on the table saw isn’t going to happen) and is quick to setup – something that corresponds to the ease and simplicity of cutting mortises using my floor...

This Episodes Questions: Brians Questions: Have been listening to your podcast for awhile now and the more I listen to more questions come to mind. Here is my current one for a walnut waterfall bench I’m working on. The dimensions are approx 58”L x 18”W x 16”D. How should I join a shelf to this bench where the grain flows continuously from the legs up through the bench top? The shelf will also be...

This Episodes Questions: Brians Questions: Just a question to ponder about the future of our favorite material. As old buildings get torn down there seems to a great supply of reclaimed lumber for our current generation. But as we know this is a finite resource. So with that said will the next generation be turning to our generation’s slab furniture for their reclaimed lumber? Doug Hey! Sorry if t...

This Episodes Questions: Brians Questions: Hey all, great podcast, thank you for doing what you do. What are some favorite Christmas gifts to make with scrap wood? Specific context for me:  been woodworking for a while, hobbyist, been giving gifts to people for years and now I've lost track of who has gotten what.  Just trying to get some ideas for this year.  Time is easier to give to a project t...

Due to some tech difficulties, we won't be uploading an episode this week. See you next time!

This Episodes Questions: Brians Questions: Love the podcast fellas! I have a simple question: When I use my table saw, I usually just check if the blade is "high enough" i.e. any height higher than the wood piece. Is there an ideal blade height for a given wood thickness? Thanks! Matt What is the most difficult project you've ever done? Brian Guys Questions: I’m wondering how thick is too thick to...

This Episodes Questions: Brians Questions: I recently bought a good amount of S3S ambrosia Maple from Rockler. I bought it at a crazy discount. The first time I picked some up they were selling it for $3 per board foot, and when I came in a few weeks later it had dropped to $1 per board foot. I asked multiple employees why the price was so low. They all said that they simply just didn't have room...

This Episodes Questions: Brians Questions: I’ve been making music boxes and trying to replicate the traditional style (see attached photos). I’m struggling to get the curved edge just right. I’ve tried using a planer, but I keep messing up and have ended up wasting a lot of boards. Router round-overs almost work, but still need planed or sanded after routing to get the shape just right, and also t...

This Episodes Questions: Brians Questions: Thank you for your awesome podcast! I recently started listening and am still working through older podcasts while staying up on your bi-weekly episodes.  I would describe myself as a longtime hobbyist who has built some basic furniture but who still has much to learn. My current project is setting up my workshop in one car space of a 3 car garage after h...

This Episodes Questions: Brians Questions: Hello gentleman, thank you again for one of the best woodworking podcasts available. I recently had the opportunity to travel to Lebanon IN for a few days of training at a tool manufacturer. I won't mention the company, but I got to use a Domino and a Rotex sander for the first time..., but I digress. While I was in the airport waiting for my flight home...

This Episodes Questions: Brians Questions Hey guys, appreciate you answering several of my questions in the past, so I thought of a few more. Feel free to separate as they are not related: 1: What do you do, if anything, to maintain furniture you have built? What would you tell a client if they were to ask you. I have always heard Murphy’s oil is a good restorative, but when I looked at a bottle a...

This Episodes Questions: Brians Questions: Howdy fellas, Love the podcast!  I'm in the process of building a bench and misjudged how much wood I could get out of a board.  The plans call for two stretchers of 3/4 maple about 65" long and 4.5" wide.  After squaring and thicknessing, I'm down to 0.75-by-65-by-4.25 which is 1/4" too narrow.  I initially thought I'd start over with a new board, but ha...

This Episodes Questions Brians Questions Hi guys. I've listened to every episode of the podcast and some of them more than once. Really appreciate all of the insights you give. It makes my commute much more fun and I've learned a ton! This question is primarily for Brian. I've heard you all poke fun at him for using Excel to plan his projects on multiple occasions. I'm very curious to learn more a...