Andrea Dallan
The Manufacturing Efficiency Podcast
Efficiency as it has never been told before.
Be sure to visit the podcast's website and support the creator: www.dallan.com
Where to listen?
Podcasts in the app Replaio Radio Coming soonPodcasts are coming to the app soon. Install now and be the first to see a whole new take on podcasts
Episodes
Lean Production: Rapid Production Change Systems 04.03.2024 13:36
In the Lean philosophy, we know that it is important to adapt production to the customer requests and that retooling on a line needs to be completed in minutes, not hours. For roll forming, the set-up time of a line was traditionally a very time-consuming operation, in which rollers were changed one by one at each station (and had to be positioned accurately and adjusted individually). For some ma...
The 4 basic steps you need to take before purchasing your new thin material processing machine 16.10.2023 9:46
When you find yourself having to decide between different production systems or when management has given you the responsibility to make this decision, you undoubtedly ask yourself the following question: what if I make the wrong investment?
How much does the cost raw material impact on your company margins? 28.08.2023 15:53
Over the past few years, we have seen a major increase in the cost of raw materials, such as hot-rolled coils, which have increased by more than 41%. Such increases make financial planning, inventory cost assessment and so on very difficult. In addition, if the cost of base material increases, margins shrink. Increasingly, we are being approached by companies to investigate ways of making sheet me...
Reshoring post-covid: 3 out of 4 companies move production back into the country 29.05.2023 11:01
The data is very interesting: in Italy, three out of four companies that had moved production abroad are moving production back into the country If we add the fact that 80% of multinationals have already drawn up plans to move production back into the country it becomes obvious that what we are witnessing is an extremely important, noteworthy phenomenon
Industry 4.0: Industrial production of the future 08.05.2023 14:46
When I first started hearing about Industry 4.0 in 2013, I must admit that I didn't understand much about it. That is precisely why I started to read up on it and fixate on the concepts that lead to evolving a company from the artisanal and master model, to a true industry of the future.
A new era for the Manufacturing Efficiency is started! 11.04.2023 17:53
What more could there possibly be to say about the world of sheet metal working that is so interesting?
It is easier to win a lottery than to find a specialized technician 13.02.2023 13:15
The difficulty of finding productive personnel, especially in Europe and North America, is becoming an increasingly widespread problem. This is accompanied by the desire to contain production costs as much as possible, replacing the personnel assigned to simple or repetitive operations with automations. The forbidden dream of entrepreneurs and companies is to produce with very little or no staff.
Flexibility: The combi system for embossing 30.01.2023 6:28
The SMED philosophy, which is an instrument of Lean Production, is the goal of perfection towards which you can strive, even over time, adding Combi groups and equipment in order to increasingly simplify and speed-up tool changeovers - as long as the machine has been conceived and designed with this in mind.
Production from Sheet or from Coil? 16.01.2023 21:10
Bito Lagertechnik Bittmann GmbH is one of the European leaders in storage systems. We process around 70,000 tons of steel sheets per year. In this case, our goal was to improve our ability to produce small batches, special pieces, prototypes and samples, to satisfy the great demand for flexibility and to produce special pieces based on specific customer requests. In this case, our goal was to impr...
Laser cutting systems combined with independent machines 19.12.2022 7:53
“We’ve been working with Dallan, both the company and the family, for over twenty years and I’m certain we’ll carry on doing so and it will continue to be very rewarding. The time invested in launching the new combined CXN line is now producing great results for our company in terms of flexibility and savings under various aspects. FEMI-CZ is a company that, as well as an important quota of standa...
Flexibility and squaring the circle 20.09.2022 13:59
In 2013, we decided to consolidate our various companies into one, Dallan, through mergers by incorporation. So, following the acquisition of the minority stakeholders’ shares, we managed to complete the whole business within the space of six months. That year I was appointed CEO and we embarked upon a profound reorganization.
1984 29.08.2022 6:03
1984 was one of the most important years in the history of our company. In that period, my father also made a trip to the United States. He’s always loved reading books on management and strategy (he’s always been self-taught) and he brought along a book by Michel M. Robert on corporate strategy. He always tells me that he was struck by a simple concept. The book explained that a company should fo...
Can you achieve Productivity & Flexibility at the same time? 18.07.2022 12:49
It’s already clear that the problem of Productivity is closely linked to Automation - which becomes a necessity - and Flexibility. In the case of plasterboard systems, they require a wide variety of profiles and frequent production changeovers were necessary. Without an extremely rapid production changeover system, even the fastest machine would have lost productivity. To this end, we developed th...
How to increase Productivity 20.06.2022 11:33
What sense did it make to produce a piece quickly if the times involved in loading and unloading the machine, production changeover, handling or packaging were much higher? I began to understand which were the right questions to ask, starting with the size of the lots, the management of production before and after the machine and from the number of production changeovers. Productivity often, if no...
Bringing back the manufacturing in the USA - with Jason Azevedo 23.05.2022 25:47
In this new episode, Andrea Dallan and Jason Azevedo (Chief Strategy Officer of MCRA https://mrca.net) discuss over the new challenge that American manufacturing will have to face in the next years.
Analyzing the cost of the warehouse and intermediate warehouses: Just In Time production 19.04.2022 11:26
Generating efficiency also means taking into account the impact of the warehouse on cash flow. One of the tools of Lean Production, Just In Time production, involves manufacturing products so that they are ready when they need to be shipped.
How to see Efficiency in terms of Lean Manufacturing 21.03.2022 8:21
Lean Manufacturing was invented in Japan, in Toyota factories. Its founding father was an engineer called Taiichi Ohno (1912-1990), who described it in his book Toyota Production System. At that time, Japan was a country exhausted from defeat in the Second World War; it was a land with few resources and geographically not large in size.
Sustainability and Cash Flow of Efficient processes 21.02.2022 10:01
Solving the problem of process efficiency has two positive effects. First of all, introducing coil-fed processing into the process - as we’ve seen - produces raw material savings that can even be in excess of twenty percent for the same quantity of product and that means positive margins and cash flow that is immediately available to the company. This may vary depending on sector and use: in any e...
Efficiency in the use of the material: CaptiveAire and its five Coil To Laser systems 24.01.2022 10:53
Captive Aire is an American customer of ours, which produces extractor hoods for industrial kitchens. These machines are made of stainless steel and have panels that can measure up to five meters in length. The problem that CaptiveAire had was the huge waste of material. In fact, the panels continuously varied in size and length: that made it necessary to use a laser system for production, but wor...
Why I became an engineer: my story 29.11.2021 22:24
I could have started this book by talking about complicated mathematical formulas and boring technicalities. Instead, I decided to tell you my story, the story of my father and his company, because it will allow you to understand how we came up with solutions and innovations that have helped manufacturing companies all over the world. Fear not, there will also be room for technical information. In...
Have you ever heard of the Pareto principle? 27.10.2021 7:44
For those who don't know him, Pareto was an Italian mathematician, economist and sociologist who lived from 1848 to 1923. While studying the distribution of wealth, he observed that in Italy, at the time, less than 20% of the population owned 80% of the land. The observation led to the well-known Pareto principle. In short, the principle states: "When we observe a phenomenon, most of the effects a...
Anthony Smith's speech 07.10.2021 11:17
Speech by business coach Anthony Smith on the book "The Revolution of Efficiency", the soul of this podcast and first book by Andrea Dallan.
Similar podcasts
Replaio is not a podcast publisher; show names, artwork and audio belong to their authors and are distributed through public RSS feeds.