Adafruit Industries

This week @adafruit Noe is showcasing his guide for his built-in USB hub for the Ikea MITTZON desk. Pedro is working on a new project inspired by the Apple HomeView. Checking out this week’s Timelapse Tuesday model of Caroline. USB hub for Ikea Mittzon https://learn.adafruit.com/4-port-usb-hub-for-ikea-mittzon-desk/ CH334F 4-port USB Hub Breakout https://www.adafruit.com/product/5997 NeoPixel JST...

#newproducts JP’s Product Pick of the Week 10/20/26 BNO055 + BMP280 BFF for QT Py https://www.adafruit.com/product/5937 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ --...

#newproducts JP’s Product Pick of the Week 10/20/26 BNO055 + BMP280 BFF for QT Py https://www.adafruit.com/product/5937 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru...

Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Coraline flexi keychain By Goomol DIY makerworld.com/en/models/3287084-coraline-flexi-keychain Bambu X1C PolyMaker PLA 5hr 26mins X:51 Y:54 Z:15mm .2mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 82g 230mm/s ----------------------------------------- LIV...

Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Build your own persistence-of-vision LED Pixel poi with custom graphics and a wireless touchscreen controller. In this project, each poi uses a Feather RP2040 RFM69 and a DotStar LED strip to display images while spinning. The controller lets you change images across all four poi at once, browse your image library, adjust settings, and record image changes for choreographed performances. You can a...

Join Scott as he demonstrates CSI camera support on CircuitPython and answers any questions folks have. Next week Tim will deep dive on Friday. Visit the Adafruit shop online - http://www.adafruit.com Thanks to dcd for timecodes: 0:00 Getting started 2:54 Hello everybody 3:43 Port Authority (USB hub) example Adafruit Product ( not released yet ) 5:58 Next week - Tim is doing deep dive - Scott at s...

Playdate-inspired lo-fi game player in CircuitPython on Fruit Jam. John Park Learn Guide coming soon. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ --------------------...

#circuitpythonparsec Use the STEMMA QT port on your board as a plug-and-play set of GPIO pins plus power and ground! Also, bonus code to ask the board for pin name aliases. code example: https://github.com/jedgarpark/parsec/blob/main/2026-10-15/code.py Learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com -------------------------------------...

John Park's Workshop Live 10/15/26 Projects JPPPoW recap CircuitPython Parsec: STEMMA QT is a LIE! Learn Guide recap tool tips teardowns gear report: M-Vave FM-1 and alt firmware retro tech and more! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord ------ Adafruit on Instagram: https://www.instagram.com/a...

This week @adafruit special guest Brent Rubell joins to chat about the Adafruit Marquee interface builder for e-ink displays and supported hardware.  Noe is showcasing his built-in USB hub for the Ikea MITTZON desk. Pedro releases a video on Adafruit Marquee. Checking out this week’s Timelapse Tuesday model of a knighted cat and community makes. Adafruit Marquee https://marquee.adafruit-playground...

#newproducts JP’s Product Pick of the Week 10/13/26 Feather RP2040 with RFM95 LoRa Radio https://www.adafruit.com/product/5714 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit....

#newproducts JP’s Product Pick of the Week 10/13/26 Feather RP2040 with RFM95 LoRa Radio https://www.adafruit.com/product/5714 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http:/...

Display live sensor readings on eInk with Marquee, Adafruit’s experimental new no-code interface builder Check it out on: https://marquee.adafruit-playground.com Marquee lets you design e-paper interfaces without writing code, storing images, fonts or rendering graphics on the device Guide: https://adafruit-playground.com/u/brubell/pages/adafruit-marquee Visit the Adafruit shop online - http://www...

Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2026/2026-10-13.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times...

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Knight cat By Sunshine3D_ makerworld.com/en/models/3400182-knight-cat Bambu X1C PolyMaker PLA 28hr 50mins X:86 Y:63 Z:138mm .2mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 257g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http:/...

🍓🖥️ one RP2350 driving two displays: 41 pages of fonts, an animated “hello,” and touch navigation that advances both screens. a color TFT + 640×480 DVI, all running on one tiny Fruit Jam. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tut...

Wiring diagram combined with recorded output from the Metro RP2350. This clip is encoded at 30 fps; the board outputs video at 60 Hz. Trying a new circuit design tool + a quick demo of Apple’s handwritten “hello” on a Metro RP2350. Wiring diagram and recorded output together… video elements in diagrams could show what the connected display… displays. The drawing comes from a nre circuit designer t...

Make glowing LED bubble hair that reacts when you move your head! In this project, six strands of seed pixels are built into a hair fall and controlled by an Adafruit RP2040 Prop-Maker Feather. The LEDs show a soft color gradient during normal wear, then the onboard accelerometer detects a head shake and triggers animated rain effects. A gentle shake creates staggered glowing droplets that fall do...

Help your code gracefully survive an I2C sensor disconnect with a try/except in CircuitPython. code example: https://github.com/jedgarpark/parsec/blob/main/2026-10-01/code.py Learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouT...

John Park's Workshop Live 10/1/26 Projects JPPPoW recap CircuitPython Parsec Learn Guide recap tool tips teardowns gear report retro tech and more! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord ------ Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://ada...

#newproducts JP’s Product Pick of the Week 9/29/26 TMF8801/8806 Time of Flight Distance Sensors https://www.adafruit.com/product/6501 https://www.adafruit.com/product/6522 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Ada...

This week @adafruit Noe is finalizing his Pepper’s Ghost Monster Eye project while Pedro is testing e-ink displays with Adafruit Marquee. Timelapse this week features a print-in-place one eyed monster. Qualia ESP32-S3 https://www.adafruit.com/product/5800 2.1in Round TFT https://www.adafruit.com/product/5792 Snow Globe https://www.adafruit.com/product/3722 Monster Eyes Guide: https://learn.adafrui...

#newproducts JP’s Product Pick of the Week 9/29/26 TMF8801/8806 Time of Flight Distance Sensors https://www.adafruit.com/product/6501 https://www.adafruit.com/product/6522 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adaf...