FPV

Let's build a lightweight tiny whoop with a top loading battery, carbon fiber frame, 3d printed parts and high KV motors. For more information about this build and a list of the materials I used, check out my detailed article: https://nuxni...

Throwing away broken tiny whoop motors? Not today! Lets rewind the copper coils of a happymodel 0802 19000KV brushless motor and return it to its former glory. For more information about this build and a list of the materials I used, check out...

Let's do IGOW4 (International Game of Whoop) Info: https://www.internationalgameofwhoop.com I'm writing about this competition on my blog: https://nuxnik.com/international-game-of-whoop-igow4/ Drone Info: Standard Happymodel Mobula7 Musi...

Let's do IGOW4 (International Game of Whoop) Info: https://www.internationalgameofwhoop.com I'm writing about this competition on my blog: https://nuxnik.com/international-game-of-whoop-igow4/ Drone Info: Standard Happymodel Mobula7 Musi...

Let's do IGOW4 (International Game of Whoop) Info: https://www.internationalgameofwhoop.com I'm writing about this competition on my blog: https://nuxnik.com/international-game-of-whoop-igow4/ Drone Info: My trusty gold-standard Happymodel ...

I figured I'd give the IGOW4 (International Game of Whoop) challenge a try. Info HERE: https://www.internationalgameofwhoop.com/ I'm writing about this competition on my blog, as it progresses: https://nuxnik.com/international-game-of-whoop-igo...

Yes, I know the lens is dirty. Drone: Happymodel Crux3 Camera: Insta360Go V1 Join me on Patreon: https://www.patreon.com/nuxnik

This is the Porthmoina Cove situated next to the abandoned Carn Galver Mine in Cornwall England. The camera picked up more Jello than I like, but hey, it saved the day after destroying my Naked GoPro. Music: Wolfgang Amadeus Mozart Requiem in D...

From Blériot-Plage in Calais, you can see Dover on the other side of the English Channel. I had to use my trusty old Insta360 Go after destroying my naked GoPro in Iceland. Music: Erik Satie - Gnossiennes 1 Equipment: Drone: Flywoo Explorer ...

This is part 2 of my "baby tooth" DIY FPV drone build series. In this video we will be creating a hybrid power connector, flipping the board orientation, remapping the motors and doing some test flights. For more information about this build ...

Today we are going to build a variant of KebabFPV's "baby tooth" FPV drone. Just what is the "baby tooth"? It is an ultralight FPV quad which typically runs on 1-2S batteries. It is small, light and very quiet when it flies. Most importantly, it o...

After watching Dave_C's video about the #NanoLongRange, I decided to take the plunge and build one myself. This video outlines my experience building this 3D printed DIY drone. I have also some additional articles about this project on my blog. ...

The Happymodel Moblite 6 tiny whoop is nearly perfect. However, there is still a bit of room for a few small improvements and modifications. Let's waterproof it and add some foam armor. This is by far my favorite tiny whoop to date. 0:44 - MOD ...

My FPV goggle batteries died 3 seconds into a flight and I nose dived my tinyhawk freestyle 2 into the roof of an industrial building. In the crash my camera mount snapped and my Insta360 Go was stranded on a snow covered roof for a whole week. Le...

Note - two people, one drum set, one bass and some pedals. Space Doom from Jena, Germany. Band: Note Song: I don't know Web: https://www.noteband.org Note from the creator: This is my first music video production. I got to pull out all my...

This is the pre-release teaser for the music video "I don't know" by the band "Note" from Jena Germany. The FPV drone version Band: Note Song: I don't know Official Release: 30.01.2021 Please LIKE and SUBSCRIBE #anuell #duo #dwarfbass #...

These buildings, located just outside of Jena Germany, stand on the site of a former military barracks originally built for the Wehrmacht in 1938. In 1945 it was taken over by the red army (GSSD) and was used as an army barracks until 1991 when th...

This is the pre-release teaser for the music video "I don't know" by the band "Note" from Jena Germany. We had the pleasure of filming this music video last December. This is my first music video production. Band: Note Song: I don't know Offi...

I had the chance to take a break and fly in the yard of an industrial complex. Emax Tinyhawk Freestyle 2, Insta360 Go with TPU mount and custom skids

I had the chance to take a break and fly in the yard of an industrial complex. Bouncing between the two buildings reminded me of a skateboard half pipe. Emax Tinyhawk Freestyle 2, Insta360 Go with TPU mount and custom skids

For this project we will be making a simple DIY 2 series battery pack with a built in voltage indicator. We are going to 3d print the required parts and solder the rest of the components together. We will also be designing our own goggle battery e...

See spinning sign - fly through it! Nothing spectacular. Emax Tinyhawk Freestyle 2, Insta360 Go with TPU mount and custom skids

In the evening, all the kids are at home having dinner. Let's see if we can't break a quad. 0:46 - Mario x 3 1:38 - Mario x 2 1:55 - Mario x 1 Tinyhawk Freestyle II, Insta360 Go, FrSky Qx7, Eachine EV300O

I am more than happy with the #NanoLongRange DIY drone. It flies for 15-20 minutes depending on the battery, is driven by a single 18650 cell, the frame is 3D printed and can reach distances of a few kilometers. However, there is one small problem...

I took my DIY 3D printed drone for a test flight. If you are interested in building your own, check out my build video: https://www.youtube.com/watch?v=5NgOPyTvMgE I have also written two articles about this project: How I built it: ht...