Bryan Orr
HVAC School - For Techs, By Techs
Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.
Обов'язково відвідайте сайт подкасту та підтримайте його автора: www.hvacrschool.com
Де слухати?
Подкасти в застосунку Replaio Radio Уже незабаромПодкасти незабаром з'являться в застосунку. Встановіть уже зараз і першими побачте зовсім новий погляд на подкасти
Епізоди
Jim Bergmann & MQ Update from NCI Summit 17.10.2024 42:14
Bryan sits down with Jim Bergmann at the NCI Summit in Asheville, North Carolina, to discuss the latest developments in HVAC technology, training, and industry trends. The discussion delves into the evolution of MeasureQuick 3.0, highlighting the shift back to a more technician-centric approach. Jim explains how they've redesigned the software to put gauges front and center and implemented an AI-...
Q&A - System Won't Dehumidify? - Short #214 15.10.2024 9:26
In this short podcast episode, Bryan answers a listener-submitted question about an HVAC system that won't dehumidify. This question was submitted by a homeowner with a Carrier heat pump with an attic air handler that cools but won't dehumidify on the hottest days of summer. One of the past companies that serviced the system added charge, but the problem wasn't resolved. This case doesn't seem to...
What Is Up With Blower Amps & Watts w/ Steve Rogers 10.10.2024 46:23
Bryan Orr and Steve Rogers dive deep into measuring power consumption in HVAC blower motors, particularly focusing on the differences between PSC (Permanent Split Capacitor) and ECM (Electronically Commutated Motor) technologies. The discussion stems from a question raised at an educators' conference about the accuracy of clamp-on meters in measuring blower motor watt draw, as specified in the ACC...
Q&A - Sizing Heat Pumps for Heat Load - Short #213 08.10.2024 9:11
In this short Q&A podcast, Bryan answers a listener-submitted question about sizing heat pumps for heat load in heating mode, something that we haven't talked much about in the past due to the greater need for cooling in our market. In most cases across the country, a heat pump's heating loads will be greater than the cooling loads. There is a greater swing between the desired temperature and the...
Water Issues - Spidey Sense 03.10.2024 41:23
This episode of the HVAC School podcast dives deep into the often-overlooked but critical topic of water issues in HVAC systems. Bryan and Bert discuss the various causes of water leaks and condensation problems, and they explain how to prevent them. They emphasize that water damage is not an inevitable part of HVAC systems and that with proper attention to detail and understanding of the underlyi...
Q&A - Cultural Diversity - Short #212 01.10.2024 12:09
In this short Q&A podcast episode, Bryan answers a listener-submitted question about cultural diversity in the workplace, especially at an HVAC company. He addresses how we can deal with cultural and language differences in a field where communication is so important. Being open to different demographics of people is great for the industry, especially since we have an aging workforce and need good...
Aux Lockout & Balance Point w/ Sensi 26.09.2024 25:30
In this informative episode of the HVAC School podcast, host Bryan Orr sits down with Tom Lorenz to talk about some of the Sensi thermostat features, particularly aux lockout and balance point. Tom leads the traditional and smart thermostat lines at Copeland and has over 25 years of experience in the industry. The discussion focuses on two key features of heat pump thermostats: auxiliary lockout a...
Q&A - How to Deploy a Dehum - Short #211 24.09.2024 9:24
In this short Q&A podcast episode, Bryan answers Howard's question about how to deploy a dehumidifier (dehum) in a sealed home. He addresses things like location and fresh air requirements in green-grass markets with high dew points. Before deploying a dehumidifier, you will need to know about the climate, the structure, and the client's complaints, budget, and comfort goals. You need to make sur...
Leak Detection - Spidey Sense 19.09.2024 42:02
In this episode of the Spidey Sense series, Bryan and Bert dive deep into the art of refrigerant leak detection, sharing their wealth of experience and practical tips for HVAC technicians. They emphasize the importance of using one's senses and observation skills before relying solely on electronic tools, highlighting how this "Spidey Sense" approach is a hallmark of senior-level expertise in the...
Q&A - Why Didn't You Notice it Last Time? - Short #210 17.09.2024 8:22
In this short Q&A podcast episode, Bryan answers Edward's question about how to deal with customers who ask, "Why didn't you notice it last time?" There isn't an easy answer to that question. The truth is that air conditioning and home health and comfort issues are complicated, and it's entirely possible that an issue simply went unnoticed (or the symptoms simply weren't apparent yet). The HVAC in...
Q&A - Vacuum Questions Answered 12.09.2024 20:50
In this episode of the HVAC School podcast, host Bryan dives deep into the topic of vacuum in HVAC and refrigeration systems. He addresses two questions from social media about vacuum, expanding them into a comprehensive discussion of best practices, common issues, and techniques for effective vacuum procedures. Bryan starts by explaining where to ideally locate a vacuum pump when working on a ref...
Q&A - Drain Traps & Static - Short #209 10.09.2024 5:55
In this short Q&A podcast episode, Bryan answers a question about drain traps and static pressure. This question was sent by Stephen with The Comfort Squad when he noticed an uptick in nuisance calls on retrofit systems that kept having their secondary drain pans filled. In negatively pressurized systems (i.e., straight-cool or heat pump units, not gas furnaces), air can pull water back into the d...
How Do You Ramp Up Your Team to Effectively Service and Support CO2 Applications? 05.09.2024 55:58
In this informative episode, Bryan Orr speaks with Andre Patenaude from Copeland about CO2 refrigeration systems. They dive deep into the unique characteristics and challenges of working with CO2 as a refrigerant, providing valuable insights for HVAC and refrigeration professionals looking to expand their knowledge in this growing field. Andre explains the reasons behind the increasing adoption of...
Q&A - Condensating Vents - Short #208 03.09.2024 13:06
In this short Q&A podcast episode, Bryan answers Kenton's question about how to stop vents from condensating, especially when sealing and insulation don't do the trick. When approaching a condensation problem, we have to consider the source of moisture and where the condensation is happening. Moisture that builds up on top of the vent comes from attics with a high dew point. (It's not because hot...
Residential & Rack Startup and Commissioning (Part 2) 29.08.2024 39:16
In this episode, Bryan and Max discuss commercial supermarket startup and commissioning with comparisons to residential HVAC work. Max, who has transitioned from residential air conditioning to supermarket refrigeration, shares his insights on the unique challenges and requirements of this specialized field. The conversation begins by emphasizing the critical importance of safety in supermarket re...
Q&A - EPR and Pressure Limiting Valves w/ Matthew Taylor 27.08.2024 29:24
In this episode, Matthew Taylor joins the podcast to dive deep into the world of pressure-limiting valves and regulators used in refrigeration and air conditioning systems. They explore the intricacies of Maximum Operating Pressure (MOP) expansion valves, Evaporator Pressure Regulators (EPR), and Crankcase Pressure Regulators (CPR), discussing their functions, applications, and differences. The co...
Residential & Rack Startup and Commissioning (Part 1) 22.08.2024 38:37
In this episode of the HVAC podcast, Bryan and Max Johnson from Kalos discuss the critical role of a startup and commissioning technician in the HVAC industry. Max, who has experience in both residential and commercial HVAC, shares his insights on the importance of understanding the scope of work, equipment specifications, and code requirements. One of the key responsibilities of a startup and com...
Q&A - Stubborn Old Techs - Short #207 20.08.2024 9:13
In this short podcast of the Q&A series, Bryan answers a question about "stubborn old techs" (submitted by Luke via Speakpipe). In several cases, old-school techs are "being positional," which means they feel that they have a piece of turf to protect; they see challenges to the status quo as a threat. They may want to defend the way that they do and have always done things. Many of these people al...
Modulating Compressors w/ Copeland 15.08.2024 49:44
In this episode, Josh Souders from Copeland joins the HVAC School Podcast to discuss modulating and variable capacity technologies in HVAC systems. Josh provides an in-depth look at the different levels of modulation available in residential HVAC equipment, from traditional fixed-speed systems to two-stage, multi-stage, and true variable-speed compressors. The conversation covers the benefits of m...
Q&A - Testing Dehumidifiers - Short #206 13.08.2024 9:25
In this short podcast episode of the Q&A series, Bryan answers a question about testing dehumidifiers (submitted by Steven via Speakpipe). Dehumidifiers run air over a cold evaporator coil (to pull moisture out of the air and drain it out) and then reheat it over a condenser coil. The air leaving a dehumidifier is of a higher sensible temperature than the air going in, but there are fewer overall...
Improving Changeout Outcomes 08.08.2024 30:18
In this episode, we dive deep into the world of residential HVAC installations and improving changeout outcomes with Matt, a senior technician and residential install supervisor at Kalos Services. Matt brings a wealth of experience from both the service and installation sides of the business, offering valuable insights into improving installation processes and workmanship. The conversation highlig...
Spidey Sense - Airflow - Short #205 06.08.2024 13:47
In this short podcast, Bryan talks about how to pay close attention to airflow issues and use your "spidey sense" when you're doing a visual inspection or commissioning a system. He also covers some causes of common airflow problems and some services and upgrades you can offer to your customers. The skill of being able to use your senses and notice when something isn't quite right is a valuable on...
Preventing Low Voltage Issues 01.08.2024 43:43
In this episode, Bryan and Bert dive deep into the world of low voltage wiring in HVAC systems. They discuss common mistakes, best practices, and troubleshooting techniques that technicians and contractors should be aware of when dealing with control wiring. The conversation begins with a focus on mechanical issues, such as running wires in places where they can be damaged and poor splicing techni...
STOP Overthinking! - QA Short #204 30.07.2024 9:05
In this short podcast from our Q&A series, Bryan answers a viewer question and implores you to STOP overthinking in the trade! He also shares a parable and some tips to help stop overthinking, especially if you're just starting out in the trade. In many cases, the simplest assumption is the right one (this is called Occam's Razor). We can always start with the most obvious or simplest possible ans...
Stewarding Younger Techs 25.07.2024 36:53
In this podcast episode, Bryan and Dre discuss the challenges and opportunities of stewarding younger techs in the HVAC industry. They explore the growing interest among young people in trades like HVAC, noting a shift away from traditional four-year college paths. The conversation highlights the satisfaction that comes from working with one's hands and the tactile nature of the trade. The discuss...
Схожі подкасти
Replaio не є видавцем подкастів; назви шоу, обкладинки та аудіо належать їхнім авторам і поширюються через публічні RSS-канали