Bryan Orr
HVAC School - For Techs, By Techs
Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.
Vizitează neapărat site-ul podcastului și susține-i creatorul: www.hvacrschool.com
Autor
Bryan Orr
Categorie
Site-ul podcastului
Cel mai nou episod
19 nov. 2026
Unde asculți?
Podcasturi în aplicație Replaio Radio În curândPodcasturile ajung în curând în aplicație. Instaleaz-o acum și fii primul care descoperă o abordare complet nouă a podcasturilor
Episoade
Matter, Mass, Weight, and Volume 11.09.2017 24:35
This episode covers some basics of matter that relate to HVAC/R. These basics include mass, weight, and volume. There will also be some talk of specific gravity and specific volume. Matter and energy are the building blocks of the HVAC industry; we move matter around and transfer energy. Matter refers to anything that exists and takes up space, including all solids, liquids, and gases. We use thre...
Ductless and VRF Diagnosis w/ John Chavez EP1 09.09.2017 1:11:26
What do you need to know to walk up and fix a VRF or ductless system? John Chavez, a longtime VRF/ductless pro, explains his approach in Part 1 of this podcast. You CANNOT have a haphazard approach to installation or service. The best thing you can do is respect VRF and ductless technology for what they are. When you take the time to understand the equipment and the processes at work, you will be...
Bonus - Tech Communication and "PM Specials" w/ Frank Besednjak 07.09.2017 59:28
Frank Besednjak talks about proper communication in conflicts between techs and managers. He also covers the potential problem with inexpensive air conditioning maintenance specials. When it comes to communication, Frank is a proponent of honesty and straightforwardness. However, he understands and appreciates the fact that people have different communication styles. He encourages people to write...
The Basic Refrigeration Circuit, Pressure & Enthalpy w/ Carter Stanfield 04.09.2017 54:17
Carter Stanfield, a co-author of Fundamentals of HVACR , talks about the entire refrigeration circuit. He also explains how to read and plot a pressure-enthalpy diagram. The refrigeration circuit has four main components: evaporator, compressor, condenser, and metering device. When teaching, Carter likes to explain that boiling is a cooling process and condensation is a heating process. He describ...
Bonus - Leak Sealants and How They Work w/ James Bowman 01.09.2017 40:59
James Bowman talks to Bryan about leak sealant products, including RectorSeal's Leak Freeze product. James talks about how sealants work, what happens when they don't work, and how to be open-minded without being gullible. Leak sealants must not react adversely with the components inside a system (oil and refrigerant). Just as mineral oil caused some issues with O-rings, POE oil has additives that...
Commercial Refrigeration for A/C Techs w/ Dick Wirz 28.08.2017 1:11:40
Dick Wirz, author of Commercial Refrigeration for Air Conditioning Technicians , talks about making the switch from A/C to refrigeration. Dick Wirz is an advocate for using rules of thumb, which is a controversial position. However, rules of thumb are an excellent way for A/C techs to dip their toes into the refrigeration world. Rules of thumb are less likely to overwhelm technicians than the exac...
Introduction to Ammonia Chillers w/ Camron Conlee 23.08.2017 41:18
Camron Conlee joins the podcast to give us an introduction to ammonia chillers. He also explains what it's like to work with a poisonous refrigerant. The California division of TDI Refrigeration, where Camron works, primarily works on ammonia systems. We often see ammonia refrigeration in cold storage and food processing; ammonia refrigeration is usually in industrial applications away from the pu...
Scales - The Episode You've been Weighting For w/ Adolfo Wurts 22.08.2017 44:20
Adolfo Wurts from Arbiter Incorporated, designer of the UEI WRS line of Bluetooth scales, comes on the podcast. We talk all about scales and how to use them. You'll want to pull a scale off your truck every time you add refrigerant to a system. Many technicians choose to estimate how much refrigerant they have to put in, and they sometimes put in more refrigerant than they estimated in their quote...
Big Announcement - 8/21/17 21.08.2017 5:24
In this quick announcement I talk about the launch of the revolutionary diagnostic and data management tool MeasureQuick
Looking past the First Thing & Facial (Hair) Profiling w/ Todd Liles 18.08.2017 1:07:15
Todd Liles of Service Excellence Training joins the podcast. He talks about techs who shouldn't be on commission, how to make the most of your career, and facial hair profiling. Todd's skillset was mixed; he had some technical knowledge, sales experience, and communication skills. He took those skills into training, and he started his own business based on his skills; his first business didn't pan...
Advanced Evacuation w/ Jim Bergmann 16.08.2017 1:11:17
Jim Bergmann returns to the HVAC School podcast to cover some advanced topics in evacuation, including rig setups and triple evacuation. To increase the speed of evacuation, you need two large-diameter vacuum hoses to overcome the limitations of pressure. Core removal is also critical, as Schrader cores are a significant restriction. It's also unwise to use a manifold for evacuation; a manifold wi...
Using ZoomLock Every Day w/ Brent Ridley 10.08.2017 26:59
In this episode, Brent Ridley talks about the flame-free ZoomLock fittings and why he is using them for almost everything to replace brazing. These are tools from Parker, and they can give you leak-free fittings within seconds. ZoomLock works in residential and commercial applications. The fittings come in a wide range of sizes for the large piping of VRF systems and the smaller copper tubing of r...
How to Perform a Leak Detection on a Low Pressure Chiller w/ Jeff Neiman 09.08.2017 45:58
Jeff Neiman returns to the HVAC School podcast to explain how we can perform leak detection on a low-pressure chiller. Jeff works on systems with glycol loops or other forms of secondary fluids, which may have leaks from time to time. When the chilled water pump on the suction side runs into a vacuum, air can get into the system via the shaft seal. Then, more leaks can occur in the glycol loop as...
Special Episode - The Launch of an HVAC Industry Changing App w/ Jim Bergmann 04.08.2017 38:29
In this episode of the podcast, Jim Bergmann talks about the launch date of the measureQuick (MQ) app, what it will do, why he made it, who it is for, and why it's different than anything else that came before. MeasureQuick is a universal measurement platform that incorporates Bluetooth to display, store, and interpret measurements. The initial release focuses heavily on air conditioning, but its...
Condensate Switch Codes and Practices w/ James Bowman 02.08.2017 40:27
James Bowman of Rectorseal returns to the podcast to discuss condensate switch codes and some best practices to comply with the codes. The humble condensate switch actually has installation standards; although there isn't a "law" about the codes, many areas follow and enforce the contents of the International Mechanical Code (IMC). Some states, including Florida, also adopt elements of the IMC and...
Bonus - Being On Call w/ Les Fork 31.07.2017 53:12
Les Fork returns to the podcast to discuss on-call rotations. He explains why being on call is necessary and how you can make the most of it. We are supposed to be on call for the sake of customer service; when a customer has an emergency, it's best for the customer (and the business) when someone is available to respond to the emergency. Of course, many of us dread being on call (although the pay...
Measuring Air Flow - Air Density and Direct Air Flow Measurement Part 2 w/ Jim Bergmann 24.07.2017 47:43
In this podcast episode, Jim Bergmann continues talking about standard air, air density, and mass vs. volume as well as some other methods of "directly" measuring airflow. It gets pretty deep. Airflow hoods and vane anemometers can give you direct airflow measurements. You use static pressure probes, not pitot tubes, to measure TESP. When measuring static pressure, you put the negative probe in th...
Bonus - Impressions From a Week as a Tech from a College Intern w/ Bill Spohn Jr. 24.07.2017 24:08
Bill Spohn Jr. is a college intern working towards his business degree, but he took a week to see what it is like to work as an HVAC tech. He shares his impressions on this podcast. Bill is the son of Bill Spohn and has been a college intern working with TruTech Tools. However, he has just gotten his first real dose of the HVAC contractor experience in the full swing of summer. Bill started off by...
Measuring Air Flow - Static / Capacity & ECM Motors Part 1 w/ Jim Bergmann 19.07.2017 1:05:15
In this two-part podcast series, Jim Bergmann talks about measuring airflow in HVAC systems. He covers a wide range of airflow measurement instrumentation and readings. In this first episode, Jim covers ECM motor considerations, delivered capacity, laminar flow, and more. In the HVAC industry, many techs confuse static pressure for airflow. Although you need static pressure to have airflow, it is...
Brazing Basics and Tips 12.07.2017 47:03
In this podcast episode, Bryan talks about brazing basics and tips. He goes over safety, regulator settings, torch positioning, flowing nitrogen, heat control, and more. Whenever you're going to be working with equipment that creates fire, you will want to make sure you know all of the safety procedures and have appropriate PPE. Make sure your gear is in really good condition; make sure your hoses...
Bonus - Blue Collar Life & Experience w/ Ralph Wolf 10.07.2017 1:11:29
Bryan talks to Ralph Wolf from T&N Services on YouTube and the Working Joe's podcast. We talk about blue-collar life, how the trade has changed for us, and what experience gives a tech that can't be read in a book. Ralph started off doing sheet metal work in the Navy before going into HVAC. He started as a sheet metal installer and learned most of what he knows about HVAC on the job. Taking accura...
Drying Stuff vs. Drying Air - Humidification, Dehumidification and Ventilation 03.07.2017 45:19
This episode is a rebroadcast of a very useful episode from the Corbett Lunsford's Building Performance Podcast at https://buildingperformancepodcast.com/ . Corbett talks to building moisture control expert Lew Herriman about moisture, ventilation, and what happens when you're drying "stuff." When we think about humidity control, we have to ask if we're drying air or drying "stuff." Dehumidificati...
Bonus - Restaurant Equipment "Hot Side" w/ Nick Messick 30.06.2017 44:47
Restaurant HVAC and refrigeration tech Nick Messick comes on the podcast to talk about restaurant equipment, especially the "hot side." The "hot side" refers to equipment that heats the food; it includes often deep fryers but has a lot of variation. The "hot side" also includes specialty equipment for frying noodles and performing other unique functions. In Nick's opinion, the worst service call h...
Building Automation Basics for the HVAC Tech w/ Phil Zito 28.06.2017 50:49
Phil Zito of Building Automation Monthly comes on the podcast to discuss building automation and what HVAC techs should know about it. Automation essentially refers to control systems; we started off with pneumatic control systems, and then we went to analog and electromechanical control systems over time. Building automation refers to the process of automating controls on a larger scale, such as...
Bonus - HVAC Contractors and Distributors, Keys to a Great Partnership 23.06.2017 41:42
In this podcast episode, Bryan and Mike Layton of Shore Distributors explain how HVAC contractors and distributors can build a great partnership. Shore Distributors is a wholesaler in Maryland that carries Carrier, Bryant, and Payne. The job of a territory manager is to help HVAC contractors, so they're there to help contractors. The territory manager's job is to help set contractors and dealers u...
Podcasturi asemănătoare
Replaio nu este editorul podcasturilor; numele emisiunilor, coperțile și materialul audio aparțin autorilor lor și sunt distribuite prin fluxuri RSS publice