Bryan Orr
HVAC School - For Techs, By Techs
Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.
Vizitează neapărat site-ul podcastului și susține-i creatorul: www.hvacrschool.com
Autor
Bryan Orr
Categorie
Site-ul podcastului
Cel mai nou episod
19 nov. 2026
Unde asculți?
Podcasturi în aplicație Replaio Radio În curândPodcasturile ajung în curând în aplicație. Instaleaz-o acum și fii primul care descoperă o abordare complet nouă a podcasturilor
Episoade
Inverter Driven Systems & Over-Voltage #LIVE 24.11.2019 54:45
In this LIVE episode, we talk about diagnosing inverter-driven systems. We also discuss some of the issues and solutions for over-voltage. Inverter-driven systems, also called variable frequency drive equipment, provide comfort control across multiple zones in a building. Some systems may have multiple branch boxes that control various units throughout a building. These systems require a lot of pa...
High Efficiency Gas Furnaces, Common Issues w/ Jim Bergmann 21.11.2019 57:09
Jim Bergmann is back on the podcast. This time, he talks about common faults with high-efficiency 90+ condensing gas furnaces and their installation. Like A/C units, 90+ furnaces often suffer from clogged drain lines. Other common problems stem from issues with inputs, temperature rise across the appliance, trapping, and venting. On high-efficiency gas furnaces, procedures like clocking the gas me...
Short #80 - 3 Differences Between Followers and Leaders 19.11.2019 15:20
Bryan explains the core differences between followers and leaders. There is nothing wrong with being a follower, but if you are ready to move into leadership roles, here are his tips. Leaders primarily leverage the work of other people. Conversely, followers have limits to their abilities and their earning potential; the leaders are the ones who set those limits. Good leaders create opportunities...
Ductless and VRF - Good, Bad & Ugly #LIVE 16.11.2019 58:52
Some great live guests join the podcast to discuss the advantages, disadvantages, and challenges of ductless and VRF equipment. We started off working on ductless equipment with Mitsubishi, especially installing them in lanais. Sunrooms have large amounts of radiant heat coming in, and the heat load often warrants getting an A/C system just for the sunroom/lanai. We even began oversizing them a bi...
Floating Head w/ Jamie Kitchen 14.11.2019 47:51
Jamie is back on the podcast. This time, he talks about the merits and pitfalls of floating head pressure and why you might care. There is a relationship between floating head and floating suction, though the latter is easier to understand. You can stage fans to come on at certain temperatures, but you'll always be running fans above a certain temperature. When temperatures are below that temperat...
Short #79 - Circuit Breaker Facts 12.11.2019 16:15
In this short podcast episode, Bryan talks about circuit breaker facts. He also explains why they trip, what they do, and some different types and considerations. Circuit breakers break the circuit during an overcurrent situation. These do NOT handle all overloads, such as locked rotor amps (LRA); these handle significant overloads, such as shorts (when current takes undesigned paths). In air cond...
The Lost Art of Steam - Revisited 07.11.2019 41:26
In this episode from the archives, Dan Holohan joins us on the podcast and talks about his vast experience in the lost art of steam learned from long-dead men. Steam heating is a "lost art" nowadays; it has become increasingly uncommon and has been disappearing since the Vietnam War. Many people who understood steam heating either retired or died after the Vietnam War. Many elements of steam heati...
What Makes a White Shirt Tech #LIVE 04.11.2019 58:01
In this honest—maybe overly honest—live podcast, we talk about the dark side of white shirt techs. We also discuss ways the industry can make money while doing the fundamentals well. The term "white shirt" refers to a sales technician who prioritizes selling equipment over fieldwork; these technicians don't necessarily sell expensive products, but they lack technical expertise. The surefire way to...
Callback Prevention Principles 31.10.2019 39:29
In this podcast episode, Bert joins Bryan to talk about what he has learned to help prevent the dreaded callback on the job. Callbacks are bad news for customer service, time, and profit. However, the highest cost is the inconvenience caused to the customer. To reduce callbacks, Bert recommends communicating your expectations to your customer clearly; explain what the expected performance should b...
Short #78 - 7 Tips for Newbies 29.10.2019 12:38
This short podcast is for the newbies out there. For HVAC trade newbies, Bryan recommends applying 7 tips to help you win. When you start off in the trades, you'll want to check your mindset. Successful HVAC technicians are usually humble; recognize that you don't know everything. The truth is that nobody knows everything, and every other person has wisdom and knowledge to offer you. (However, don...
Why is a Power Quality Meter Useful? w/ Jim Bergmann 24.10.2019 40:48
Jim Bergmann returns to the podcast to talk about the power quality meter. He also discusses what it is good for and how to use one. A power quality meter accounts for the power factor in its measurements, and it measures true power in watts. We can notice failing capacitors and other issues that can cause a device to draw higher wattage. In inductive loads, the power factor will be less than 1. H...
Short #77 - What Causes Capacitors to Fail 22.10.2019 17:01
In this short podcast, Bryan talks through (once again) what REALLY causes capacitors to fail and what we can do about it. High temperatures and overvoltage (NOT undervoltage) are what cause capacitors to fail. (There are also some poor manufacturing practices out there. Remember: they should be just foil and oil.) Capacitors create a phase shift to assist split-phase induction motors. Normally, a...
Commercial PM Best Practices #LIVE 20.10.2019 53:29
Eric Mele, Eric Kaiser, and John Oaks come on the podcast to talk about commercial PM best practices and what matters most. Drain cleaning is a critical part of the standard commercial PM. You must assess the drainage situation (pitch, length, location, etc.) to plan your cleaning strategy and arrive at the best result: the entire drain gets cleaned. If you use chemicals, you need to be very caref...
The Skills Gap and Training #LIVE 17.10.2019 1:03:34
In this live podcast from CASTBOX, we discuss the skills gap and how we are going to get more people into and trained in the HVAC/R trade. Instead of gaining skills early in life and then looking for a job, many of us in the HVAC/R trade started our careers and gained skills along the way. The most successful technicians (and Bryan's favorite job candidates) have the "growth" mindset and care abou...
Who is Responsible for Proper Sizing? 17.10.2019 1:09:46
In this episode, Nate Adams and Michael Housh give the HVAC 2.0 rebuttal to the idea of standard load calculations. They take a different, possibly more radical approach to proper sizing. Michael and Nate believe in doing real-world load calculations, not just relying on models for load calculations. They are on the side of replacing equipment like-for-like unless the customer will pay for the pro...
Short #76 - The Freon Sniffer (A True Story) 15.10.2019 9:15
In this true story from Bryan's teen years, you learn about the "Freon Sniffer:" what inspired him to become an HVAC/R technician (maybe). When Bryan was working with his uncle at age 14, he was an electrical apprentice who worked in grocery stores. He installed "pink lights," which were lights that hung on aircraft cable over produce displays. (The aircraft cable came from Bryan's grandfather's a...
How to Use a Combustion Analyzer w/ Jim Bergmann 10.10.2019 59:10
In this podcast, Jim explains how to use a combustion analyzer. He also talks through the process of combustion analysis using Accutools BluFlame. The beauty of BluFlame is that it can do CAZ testing, help you set the inches of water column in your furnace, and measure static pressure drop. BluFlame is a tool you can use year-round, not just when you need to measure stack gas. To learn how to use...
Short #75 - Stop Duct & Unit Sweating 08.10.2019 19:41
Duct and air handler (unit) sweating is a common issue in humid climates. Bryan talks about what causes it and what to do about it. Many people try to keep their ducts and equipment either very cool or very warm to prevent sweating. Despite the good intentions, neither of those methods is great for sweat prevention. If a ceiling grille is sweating, people try to insulate the top of the boot to sto...
Stop Designing Ducts Backwards w/ Alex Meaney 03.10.2019 32:58
Alex from Wrightsoft is back to discuss duct design. He also explains a common mistake made when designing ducts using a Ductulator. The Ductulator is a common entry point for technicians who get into duct design, so it sticks with technicians despite its flaws. It makes more sense to reverse the process by picking a friction rate and pressure drop as the first step when designing ducts. Figuring...
Short #74 - So You Wanna Start a Business Eh? 01.10.2019 15:49
In this short podcast episode, Bryan explains what you need and the things you need to consider if you want to start a business in HVAC/R. When you start a business, you need to have a healthy reserve of money already. Kalos started with $100,000, and that money went towards vans and tools needed for a GC and HVAC business. Even if you start a business with just one person and a truck, it's best t...
The Dangers of Like-for-Like Tonnage 26.09.2019 1:05:56
Alex Meaney from Wrightsoft joins us to talk about Manual J and S. He also discusses how load calculations and equipment selection apply to real-world situations where contractors are tempted to replace "like-for-like." Load calculations have been a staple of new installations, but they are becoming important in retrofits as well. We consult Manual J when we do load calculations for residential HV...
Gauges, Probes & NIST #LIVE 24.09.2019 1:09:17
In this live podcast from the Castbox app, we talk about analog vs. digital, digital vs. probes, and probe vs. non-invasive testing of A/C and refrigeration. We also talk about apps and various Bluetooth tools. Although analog gauges are old, reliable tools, digital gauges tend to be a bit more accurate than analog ones. However, the jury is still out on which one has the durability edge. Digital...
Short #73 - Ambient CO 24.09.2019 10:04
In this short podcast episode, Bryan talks about ambient CO. He also explains why it matters and what you do to check for it. CO, carbon monoxide, is a colorless, odorless, and toxic gas that can result in death. It should not be confused with CO 2 , carbon dioxide. Although our bodies inhale oxygen and not carbon dioxide, the latter isn't toxic if it gets into our bloodstream. CO, on the other ha...
Geothermal System Considerations w/ Michael Housh 19.09.2019 1:07:50
In this podcast, Michael Housh joins us to discuss his years of experience with geothermal heat pumps and their special considerations. "Geothermal" is a rather generic term, similar to how people say "Freon" to refer to any kind of refrigerant. Those heat pumps don't necessarily have to be underground; you can have water-source heat pumps in ponds or wells, and there are also ground-source heat p...
Short #72 - Vapor Diffusion 17.09.2019 9:02
In this short podcast episode, Bryan explains what water vapor diffusion is. He also explains why it matters to the everyday HVAC technician. Vapor diffusion is the transfer and distribution of water vapor through a solid surface. New constructions sometimes have vapor barriers on the outside of buildings in hot, humid climates or on the inside of buildings in cold, dry climates. (Even so, vapor b...
Podcasturi asemănătoare
Replaio nu este editorul podcasturilor; numele emisiunilor, coperțile și materialul audio aparțin autorilor lor și sunt distribuite prin fluxuri RSS publice