Bryan Orr

HVAC School - For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

Vizitează neapărat site-ul podcastului și susține-i creatorul: www.hvacrschool.com

Autor

Bryan Orr

Categorie

Business

Site-ul podcastului

www.hvacrschool.com

Cel mai nou episod

19 nov. 2026

Unde asculți?

Podcasturi în aplicație Replaio Radio În curând

Podcasturile ajung în curând în aplicație. Instaleaz-o acum și fii primul care descoperă o abordare complet nouă a podcasturilor

Descarcă din Google Play Instalează gratuit Android 10 mil.+ descărcări · nota 4,7+ iOS în curând

Episoade

TXV Bulb Placement - Short 109 26.01.2021

In this short podcast episode, Bryan talks about the placement of the TXV sensing bulb. He also explains how it affects the opening force on the TXV. The TXV sensing bulb (or sensor on an EEV) provides the opening force for the valve. The warmer the bulb gets, the more the valve opens; the colder the bulb gets, the more the valve closes. The TXV also has a closing force provided by the spring pres...

Dealing with Difficult Customers 21.01.2021

In this podcast episode, Bryan, Erich Vinson, and Anthony Marino talk about dealing with difficult customers in the HVAC industry. When working with customers in general, it is best to make eye contact with the customer, listen to them, and put yourself in their shoes. When dealing with difficult customers, we must remember that there are several potential causes for their "difficulty." You can't...

Hydrostatic Pressure - Short 108 19.01.2021

In this short podcast episode, Bryan explains how hydrostatic pressure can build up in refrigerant cylinders and present a hazard to technicians. Your refrigerant cylinders have tare weight and water capacity values stamped on the tank. You'll want to use these when weighing the refrigerant you recover because you don't want to exceed 80% capacity. However, capacity changes when the liquid density...

Introduction to Industrial Refrigeration 14.01.2021

In this podcast episode, Bryan, Trevor Matthews, and Jim Dick from Emerson give us all an introduction to industrial refrigeration. Jim works with contractors to provide tech support. He also does the startup and commissioning of refrigeration compressors and gas compression units. Industrial refrigeration refers to warehouses and distribution networks. Grocery refrigeration is commercial refriger...

Prevent Refrigerant Migration - Short 107 12.01.2021

In this short podcast episode, Bryan talks about the strategies we can use to prevent refrigerant migration during the off cycle. We often see refrigerant migration when the compressor is lower than the evaporator, especially in low-ambient conditions when the refrigerant can condense in the crankcase. When the compressor starts up, you get a violent reaction as the refrigerant boils off and eject...

Weird Transformer Talk 07.01.2021

In this podcast episode, Eric Mele joins Bryan for some weird transformer talk. They discuss corner-tapped transformers and some thought experiments. We hadn't been able to get our heads around corner-grounded transformers until recently. "Grounding" doesn't necessarily change the phase or lead that you ground. If you take the secondary of a 24-volt transformer and measure from your two colors, yo...

Internal vs. Externally Equalized Valves - Short 106 05.01.2021

In this short podcast episode, Bryan compares internal and externally equalized valves. He also covers how forces act upon the TXV. Equalization does not happen on the off cycle. When we talk about equalization, we are merely talking about a force that balances against the bulb force. A TXV sets the superheat within an operating range at the evaporator outlet; the sensing bulb on the TXV detects t...

Custom Performance Home w/ Spohn 31.12.2020

In this podcast episode, Bryan talks with Bill Spohn about his most recent project, SpohnHome. SpohnHome explores Bill's journey in custom home performance. Projects are complicated because so many trades work together to accomplish a building. However, custom homes are particularly challenging, especially in Bill Spohn's case. His home is a "personalized performance home," so he's prioritizing en...

Service Valve Tips - Short 105 29.12.2020

In this short podcast episode, Bryan talks about some tips you can use when working with a multi-position service valve. A service valve will have a line connection, which connects the valve to your line set. You also have a gauge port that you can connect to, a valve stem, and a packing gland nut (directly beneath the valve stem). If your stem is completely back-seated, then your gauge port is co...

Refrigeration Scroll Compressors 24.12.2020

In this podcast episode, Bryan and Trevor Matthews from Emerson talk through scroll compressors in commercial refrigeration equipment. Scroll compressors are not a monolith; although they all function similarly, they have different fine details and manufacturing protocols by application. Low-temp, medium-temp, high-temp, and A/C scroll compressors each have unique designs, operating conditions, an...

Bert's Top Soft Skills Tips 17.12.2020

In this episode, Bryan and Bert talk about soft skills. They also discuss why soft skills are important in highly technical trades. Bert's class defined "soft skills" as communication skills; these can be verbal but may also include body language and how we respond to emotional situations. Bert thinks these skills are some of the most important skills you can develop in the HVAC industry and in li...

Gas Furnace Diagnosis & Inspection w/ Jim Bergmann 10.12.2020

In this podcast episode, Bryan and Jim Bergmann talk about gas furnace diagnosis and inspection. They cover the ins and outs of furnace assessment. A gas furnace diagnosis requires a few important measurements, but a solid visual inspection is perhaps even more vital. You'll want to look at the venting and condensate disposal systems. You'll want to make sure the flue gas can escape properly and t...

Pitot vs. Static Pressure Probe - Short 104 08.12.2020

In this short podcast episode, Bryan talks about the differences between pitot tubes and static pressure probes. He also explains how each one works. People often mix up static pressure probes and pitot tubes. A pitot tube is a tube within a tube, and a static pressure probe is just a tube with holes in the side but not at the end. When we measure static pressure, we're measuring the pressure agai...

Balancing Evaporators in a Circuit Using the TXV 03.12.2020

In this podcast episode, Bryan and Nathan discuss balancing evaporators in a multi-coil circuit. They specifically focus on using the TXV to do so. When we say "balancing evaporators" in a multi-coil circuit, we're referring to the temperature of the air leaving the system; we are worried about the air keeping the product cool in grocery refrigeration. If everything works correctly, the evaporator...

Mass Flow vs. Volume Flow - Short 103 01.12.2020

In this short podcast episode, Bryan discusses the difference between mass flow and volume flow when referring to HVAC equipment processes. When you are confused as to whether you're dealing with mass or volume flow, think about the units. For example, cubic feet per minute (CFM) is a measure of volume  because we're talking about cubic units. We care about the volume when we think about air mixin...

Freezing Evaporator Fun Facts & Frippery 26.11.2020

In this episode, Bryan and Sam discuss freezing evaporator coils. They explain why frozen coils happen and how to address them. When the coil's surface temperature drops below freezing (32 degrees), the moisture in the air that condenses on the coil can freeze to the coil. In those situations, your suction saturation will probably be in the mid to high twenties. Generally, freezing evaporators wil...

Drain Cleaning - More To It Than We Think 19.11.2020

Mike Klokus and Corey Cruz from Kalos come on the podcast to talk about drain cleaning. They discuss their tips and some best practices. Approximately 50% of the calls in the light commercial division have to do with drains, and drain cleaning is a common PM procedure. The procedure starts off when you pull the panel off the air handler and look in the drain pan. Muck can accumulate in the pan and...

Open v Closed Refrigeration - Short 102 17.11.2020

In this short podcast episode, Bryan talks about the differences between single-phase and two-phase refrigeration. This particular episode is about the fundamentals of physics, chemistry, and science in general. When we talk about phases, we're referring to the changes in the states of matter. We typically think of the states of matter as solid, liquid, and gas. In refrigeration systems, the refri...

Changing Refrigerant Regulations w/ Bluon 12.11.2020

In this episode, Bryan talks with Peter Capuciati and Bryan Johnson from Bluon. They discuss how refrigerant regulations keep changing and how technicians can make sense of it. We've begun phasing out R-22; the refrigerant can no longer be imported or manufactured in the United States. We can still recover and reclaim R-22, but the recovered refrigerant on the market can't meet the usual demand. R...

Single Phase v Two Phase Refrigeration - Short 101 10.11.2020

In this short podcast episode, Bryan talks about the differences between single-phase and two-phase refrigeration. This particular episode is about the fundamentals of physics, chemistry, and science in general. When we talk about phases, we're referring to the changes in the states of matter. We typically think of the states of matter as solid, liquid, and gas. In refrigeration systems, the refri...

Floating Head Strategies 05.11.2020
CO2 Architecture 29.10.2020

Don Gillis joins us again to talk more about common types of CO2 systems and how they differ

Heat Pumps in Cold Climates 27.10.2020

In this episode, we are joined by three people who know a lot about heat pumps and cold weather. We also cover everything from the way technologies have changed, some of the pitfalls to keep away from, and why heat pumps work even in really cold climates nowadays. Chad Gillespie: Chad is a senior manager, part of Mitsubishi Electric's Performance Construction Team. He currently leads a national te...

Demand Cooling + Liquid and Vapor Injection 22.10.2020

Trevor Matthews is back and dropping more compressor knowledge on us. This time, he talks about demand cooling and liquid and vapor injection. In low-temperature applications, the discharge temperature would get very high and lead to oil breakdown and thermal overload, so demand cooling is a means of cooling the compressor. Demand cooling injects saturated refrigerant into the compressor body to c...

Intro to CO2 w/ Don Gillis 15.10.2020

Don Gillis with Emerson joins us on the podcast to teach us the basics of CO 2 as a refrigerant. He explains how it works and its applications. Carbon dioxide is a colorless, odorless gas that is becoming an important refrigerant for commercial refrigeration (R-744). It is desirable because it has a low critical point and high triple point, so we can use subcritical (below the critical point) and...

Ascultă podcastul HVAC School - For Techs, By Techs în Replaio

Radio și podcasturi într-o singură aplicație - gratuit și fără înregistrare. Instaleaz-o azi și nu rata lansarea

Descarcă din Google Play

Replaio nu este editorul podcasturilor; numele emisiunilor, coperțile și materialul audio aparțin autorilor lor și sunt distribuite prin fluxuri RSS publice