Advanced Manufacturing Now

Because it is a production cost, reducing the need for deburring can help the bottom line. In this podcast, part two of two, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Dr. LaRoux Gillespie, a researcher, engineer, manager, consultant, and writer with an extensive knowledge base on deburring and finishing. In this episode, the discussion focuses on ways to reduce...

Eric Kam, Product Marketing and Community Manager for ESI Group will discuss the various flavors of digital reality available today. Virtual Reality, Augmented Reality, Mixed Reality are all discussed. But aside from games, dealership showrooms, and operator training which seem to be the bulk of applications discussed by the world as a whole, which technology is right for you? This podcast will he...

William Crane, CEO of IndustryStar, an on-demand supply chain services and software technology company, dives into what manufacturers concerned about supply chain risk can do to worry less. In his estimation, "on-demand supply chain risk management resources have really been taking off." It is possible, he said, to build a "supply chain competitive advantage." Heard of agile supply chain? If not,...

Marty Edwards, vice president for operational technology security at Tenable, discusses how chief information security officers (CISOs) are integrating and converging across all aspects of security, including people, process and technology. The goal: get an enterprise-wide assessment of cyber exposure and overall risk.

Combining beautiful beaches with a disciplined, ready-made workforce, this podcast looks at the advantages of manufacturing in Okaloosa County, Florida. To discuss why a move to the Florida Panhandle might make sense, Bruce Morey senior technical editor for Manufacturing Engineering magazine is joined by Nathan Sparks, executive director of the Okaloosa County EDC.

A whole new layer of insight can be harvested inside factories with the data you already have, today. Companies are sometimes holding back from leveraging sensors and tools like AI and deep data analysis that would allow for it because of cultural gaps between, for example, IT and OT. Ownership issues can also be a problem if some are, say, building devices vs operating devices. Paul Boris, EVP at...

When it comes to machining, for as many opportunities as there are for amazing things to happen – there are just as many things that can go wrong. Dave O'Neil, vice president, SME Media, sits down with Don Davies, vice president, DP Technology Corp., the developer of Esprit CAM/CAD software to talk about how advancing technology is helping solve manufacturing challenges. Modern CAD/CAM systems are...

The manufacturing industry is on the precipice of a great remake where companies are accelerating from being merely producers of goods to producers of customer experiences. Digital processes has become a critical source of growth and a powerful way to increase brand equity whether its industrial, consumer packaged goods or anything in between. One way they are increasing effectiveness is leveragin...

Aerospace is thought of as the industry with some of the most advanced technology, including automation. However, especially in automation, that may not be exactly true. In this podcast, Bruce Morey senior technical editor for Manufacturing Engineering magazine talks with Rick Schulz of FANUC America about some of the challenges and misperceptions in using automation more fully in aerospace manufa...

As manufacturers work to keep critical operations humming along during the COVID-19 crisis, they're tasked with protecting workers health while ensuring business continuity and operational readiness. Russ Fadel, CEO at Augmentir, talks with Chris Mahar, Associate Editor, about how connected worker technology can benefit operations during today's pandemic and when things return to normal. Enabling...

April is National Welding Month and exciting things are happening within the industry. In this podcast, Chris Mahar, Associate Editor of Manufacturing Engineering magazine, talks with Monica Pfarr, Executive Director of the American Welding Society Foundation about what's happening in the industry and what AWS is doing to celebrate. From the industry as a whole to the current market temperature an...

Like many disciplines, metrology has taken giant steps in recent years as new technology creates new measurement technology that is faster, more accurate and easier to perform than ever before. In this episode, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Michael Wilm, business manager of calibration products for Renishaw Inc., about the emerging trends that are cr...

The trade war and disruption from the coronavirus are spurring companies to rethink their global supply chains, manufacturing processes, factory design, automation and workforce needs. In this episode, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Rosemary Coates, Executive Director of the Reshoring Institute, about how the trade war and COVID-19 have affected manuf...

The manufacturing industry has always been interchangeable with producing customer goods. But, increasingly it is an industry that must transform itself to become a producer of customer experiences. Whether industrial, consumer packaged goods, or anything in between, manufacturers have begun investing in customer experience, or CX for shorthand. To discuss this new, emerging trend in this podcast,...

In this podcast discussion with Rick Schultz of FANUC America and Bruce Morey, Senior Technical Editor for Manufacturing Engineering Magazine, current practices in aerospace machining is dissected. Many shops today stick with the tried and true to reduce risk to schedule and profit, but that tried and true is stuck in the 1980s and 1990s. Rick discusses practical ways to get the most out of 21st c...

Additive manufacturing has made an outsized impact on aerospace manufacturing in a short amount of time. In this episode, Alan Rooks, Editor in Chief of Manufacturing Engineering, talks with Sean Henson, Global Product Manager, Composites & Additive Manufacturing for Ascent Aerospace, about the growing role of additive in the industry; the investments Ascent has made in AM in recent years; the kin...

Mark Kirby, Registered Professional Engineer and Additive Manufacturing Business Manager for Renishaw Canada and Bruce Morey, Senior Technical Editor for Manufacturing Engineering Magazine discuss the pluses and minuses of the still-emerging 3D printing technology that is sweeping the business press. We will take a look at common misconceptions and what, in our opinion, could be things to watch ou...

Smart Manufacturing magazine Contributing Editor Karen Haywood Queen speaks with Sridhar Tayur about what supply chain players are learning from COVID-19. The Carnegie Mellon professor covers the roles AM and cobots are playing. He also looks at what manufacturers should consider doing to be prepared for the next hugely disruptive event.

The use of automation is growing rapidly in aerospace manufacturing and many companies are looking for help navigating this new reality. In this episode, Alan Rooks, editor in chief of Manufacturing Engineering magazine, talks with Randy Woolridge, global product manager, automation & integration for Ascent Aerospace, about the services Ascent provides customers in aerospace manufacturing and inte...

One of the key challenges in aerospace manufacturing is how to measure and inspect the complex and demanding parts used in aerospace applications. In this episode, Alan Rooks, editor in chief of Manufacturing Engineering , talks with Mark O'Connell, applications engineer for ZEISS Industrial Quality Solutions, about the challenges aerospace components like airfoils pose for industrial metrology; h...

Composites are increasingly becoming a key feature of the aerospace market. In this episode, Chris Mahar, Associate Editor, talks with Doug Decker, aerospace consultant and retired technical fellow at Northrup Grumman – winner of the 2019 J.H. "Jud" Hall Composites Manufacturing Award. Decker shares his insights about composites within the aerospace market and a bit of history on how he got to whe...

Pivot International CEO Mark Dohnalek talks with Smart Manufacturing magazine's Brett Brune about not only Industry 4.0 but also how manufacturers are breathing a sigh of relief because of the China Trade Deal First Phase, the U.S.-Mexico-Canada Agreement and the arrival of Brexit. Dohnalek also details how Pivot has successfully alleviated trade tensions operationally.

When it comes to manufacturing – especially machining – the toolroom is the heart of an operation. The critical tool management, cleaning, assembly, presetting and delivery that comes out of the toolroom is what keeps manufacturing life pumping out on the shop floor. Chris Mahar, Associate Editor, talks with Jeff Schemel, North American Sales Manager at Rego-Fix, about how automating their toolroo...

Alan Rooks and Brett Brune, editors in chief of Manufacturing Engineering and Smart Manufacturing, respectively, preview some of the actionable information readers can find in the February issues.

Terry Wohlers, a renowned expert on additive manufacturing, and Bruce Morey, Senior Technical Editor for SME's Manufacturing Engineering Magazine, discuss the present and future of AM in the medical and dental fields. Applications are discussed and skepticism addressed as the industry anticipates RAPID + TCT in Anaheim April 20-23 and the Additive Manufacturing for Medical Yearbook SME will publis...