WELD

In this week's episode, Beau stopped by the Razor Weld booth at Fabtech and got to chat with Richie Sather. After welding for 18 years he stepped into a new role of customer service helping train people on the machines over at razor weld. He talks about giving advice from a welder's perspective on features implemented in their new machines, making machine lines that are going to fit the budget of...

In this week’s episode, Beau chats with Chris Verdi aka Green Money Fab about how he turned his passion for BBQ into a side hustle building smokers, open fire tables, and fire boxes. He talks about how after an accident at work left him with a lot of free time during recovery he took to youtube to entertain himself and fell in love with the art of BBQ. He chats about the types of metal he uses to...

In this week's episode, Beau stops by the Pearl Abrasive booth at Fabtech to chat with Kody Jones & Brett Bishop about the different types of abrasives they carry and the innovations they have been making in the abrasive space. They talk about the importance of having hubs attached to wheels to speed up the process of changing from each type of abrasive, some of the research and development th...

In this week's episode, Austin joins Beau for a chat with Bryn Otto, Andrew Nichols, and Jordan Packer to catch up after a year to see the growth they have gone through entering into the industry. They talk about some of the hurdles they have had to overcome, some big moments, and then leave us with some advice they would give themselves if they could go back. If you are about to get out of school...

In this week's episode, Beau and Austin chat with Patrick aka @GMAW_Welding_Belgium who was demoing the Abicor Benzil XFume 501 Pro over there to compare the shows to each other. With the two shows happening the same week, everyone had to pick between the two and we wanted to hear his experience since we were checking out Fabtech. He talks about seeing an underwater welding demo tank, DJ sets in t...

In this week's episode, Beau sits down at the ESAB booth at Fabtech to chat with John Hartnett, part of their filler metal team about filler metal selection and the process of manufacturing and adding different alloys. Then he turns the mic over to Kris Sherm to talk about the new engine drive machine the ruffian and plasma cutting and getting clean cuts. To find out more about ESAB www.esab.com T...

In this week's episode, Austin is back as a co-host with Beau to talk to Rich Quinn an automotive engineer who just took 1st place at Scrapfest with his sculpture the Scrapacaster. He talks about the event and what went into designing and creating the sculpture, they talk about the disconnect in communication between welders and engineers, and Rich talks about how engineers keep their skills sharp...

In this week's podcast, Beau is joined by Austin Hargett to chat with Korissa Morgan aka Universe Welder where she talks about the techniques she uses to get her amazing arc shots. She talks about her adventure bouncing around different companies welding all kinds of different things while building an impressive resume, She talks about making keychains on the side, and documenting your welds so yo...

In this week’s episode, Beau sits down with Bartosz and Peter from ESAB to talk about their welding machine, the Renegade Volt. Blazing a new trail of portability running off 4 Dewalt batteries that can also be used to run your tools. They talk about the issues they were hearing from welders in the field that lead to help with development, go over industries that would benefit from the machine, an...

EP 117: The Realities of Being A Rig Welder with Hunter Wilson In this week’s episode, Beau chats with Hunter Wilson aka @texaspipeliner35 or Professor Wilson about the realities of being a rig welder. When getting into the trade a lot of people set their sights on becoming a rig welder, and he gives us a first-hand perspective of what it is like to run your own rig. He talks about costs from cons...

In this week's episode, Beau sits down with Anthony Fildes, A welder and owner of Alpha Welding Services in Ireland. They met last year at Fabtech and discuss the benefits of attending the expo and what he is looking to get out of this years show. He talks about growing his business over the past year, dealing with getting paid from jobs, and then advice for getting your name out there and making...

In this week's episode, Beau got the chance to sit down with Rae Ripple. She has been nicknamed the Human CNC because of her mad skills with a plasma torch which you might have seen on the show Metal Shop Masters. She talks about her passion for showing the next generation to follow their passions and live as their authentic self. She also dives into the stigmas around metal artists in the eyes of...

In this week’s episode, Beau sits down with Nate Bowman, who you might know as the Weld Scientist. He gives us a rundown on his pathway into the industry and the journey to where he is now helping people qualify welding procedures and helping people learn about the innovations in technology that can speed up workflows and save companies money. He sees a major problem with the lack of knowledge whe...

In this week’s episode, Beau sits down with Sam Oldham, a welder who has been sharing tips from the road on TikTok to try and help people who are getting into welding or trying to chase the shutdown life. He shares how he learned how to weld after hearing about it from students from Missouri Welding Institute, then took lessons with a mutual connection. From showing up for a job to only be told th...

In this week's episode, Beau chats with Pa'trice Frazier a Master welder based in Philadelphia. She was recently on the show Hot Wheels: Ultimate Challenge taking an old Charger and giving it the classing Hot Wheels overhaul installing a wheelie bar and putting a big Hemi engine in the trunk to make the car stand up like the contestant had always dreamed. She is an advocate for getting people into...

In this week’s podcast, Beau sits down with Jordan Moreno an Underwater Welder and Commerical diver. Jordan talks about his journey into the trade when he decided to go to welding school instead of a traditional college and transitioned into the diving world after seeing people working in the water at a shipyard. He helps put some myths and misconceptions to rest about mortality rates, safety, and...

In this week’s episode, Beau sits down with Calvin Gordon of ArcOne Welding. Calvin is a coded pipe welder over in the UK and recently just started his own business. He shares his passion for the trade through welding videos on his YouTube channel. He talks about his experience going to college for welding where he was taught SMAW, then transitioned to GMAW when he started working for a pipe fabri...

In this week’s episode, Beau got to talk with Dan Colvin the Vice President of Robotics and Digital Solutions of North America over at ESAB. Automation is becoming more and more prevalent and the idea is a little scary to some people. From the fear of being replaced or having to spend time learning complicated programming. Dan talks a little bit about the progression of technology in the robotic s...

In this week’s episode, Beau sits down with Ben Caya owner of Spike Brewing. He talks about starting his company after falling into modifying old kegs into homebrewing setups when he was in college. Flash forward to today and they are making top-of-the-line brewing equipment out of stainless steel manufactured in Milwaukee, WI. He talks about the relationship between welders and engineers, some te...

EP 107: Choosing A Pancake Hood Over A College Flag with Ricardo Gonzalez  In this week's episode, Beau sits down with Ricardo Gonzalez a 19 year old welder that graduated top 10 of his class and is following in his late brothers footsteps of being a welder. He talks about loosing his brother at 17 and starting to weld to have a closer connection to him. After starting he fell in love with the tra...

In this week’s episode, Beau sits down with Donny Spara aka Strike Core Welding on Instagram and they chat about his pathway to pipe welding. He talks about how he was just about to give up chasing the dream of welding pipe when he was offered a job at the skatepark in all places. Donnie shares the road into welding that started when he just said yes when someone asked if he could weld. He bounced...

In this week’s episode, Beau sits down with Jonny Snider owner and operator of Jonny S Weld LLC to talk about Scrapfest. Scrapfest is a festival where artists are invited to make sculptures out of recycled materials that are sourced from the scrap yard in Lansing, MI. He talks about his experience participating in the festival last year solo and plans for returning as a team with Mike Beaver this...

In this week's episode, Beau sits down with Dave Taylor aka TMDesigns39 and they chat about what it has been like taking scrap metal and miscellaneous parts and turning them into works of art. Dave tells us about how he tries to keep everything in-house from CNC cutting parts to building his own powder coating setup. He shares insight into doing the work you love, using social media to sell his wo...

In this week's episode, Beau sits down with Stephanie Hoffman. She tells about how she found her passion for welding by working with her Dad. She pushed to get more involved with the AWS and has been going on tours around the country trying to expose more people to the trade. She also talks about starting her company Underground Metalworks which evolved into a training facility and school. She sha...

In this week's episode, Beau sits down with Mike Wagner, owner of Cornfield Customs out of Milford, Ohio. He talks about how he got his start in the world of metal forming after attending a vocational school for aluminum welding. He gives some insight into the type of tools he started off with, what kind of materials he works with, and then dives deep into the mentality of being a small business o...