The Mortise & Tenon Podcast

Another installment in the Nature and Art of Workmanship series. This time Joshua and Mike walk through chapter six which compares human creativity to the natural world. Regulated work was coveted in ancient cultures because they were surrounded by nature. In our industrial culture, however, we need the liveliness and idiosyncrasy of handwork.

Another installment in the Nature and Art of Workmanship series. This time Joshua and Mike discuss the fifth chapter which shows the limits of design. Much of the success is left to the workman.

In this episode, the guys dive right into the heart of Pye’s vision in this book: identifying and appreciating various qualities of workmanship. This is the longest and most detailed chapter in the book but skimming past it guarantees you’ll miss his point.

Another installation of Joshua and Mike’s discussion on David Pye’s book The Nature and Art of Workmanship. This time, the guys dive into the thorny question of what “handmade” actually even means. Is it even a worthwhile concept to use?

The third installment of Joshua and Mike’s walkthrough of David Pye’s The Nature and Art of Workmanship. This time they look at chapter 2 in which Pye lays out his fundamental (and famous) distinction between workmanship of risk and workmanship of certainty. It might not mean what you think…

In this latest episode, the guys explain the setup to David Pye’s discussion about the value of workmanship. Pye explains that it would be a mistake to give too much credit to the design when the quality of the finished object is greatly determined by the artisan’s touch. Pye asserts some bold things in this chapter: “Good material is a myth” and “a street full of parked cars is jejune.” Listen to...

In this episode, Joshua and Mike kick off a mini-series chapter-by-chapter walkthrough of David Pye’s classic book The Nature and Art of Workmanship. Lots of craftspeople have heard of Pye, but few today understand (or have ever even read) his illuminating book. In this episode, the guys discuss the introduction which charts the course to dispelling myths and misunderstandings. Craft matters. And...

If any of M&T’s work is worth pausing to reflect on at the close of the year, this year’s would be a prime candidate. Not only has the House By Hand project occupied the bulk of Joshua and Mike’s time in 2022, but M&T also published a new book (Worked: A Bench Guide to Hand-Tool Efficiency), ran several Apprenticeship terms, hosted a Summit gathering, and more. Before blindly setting out on the ne...

Clear distinctions reveal new things about the world. And in a handcraft context, thinking clearly about what exactly a “tool” is or a “machine” or a “jig” enables woodworkers to maximize their shop satisfaction and efficiency. Some folks seem to think that theory and practice are intrinsically antithetical to each other, but Joshua and Mike have found clear-headedness to be tremendously helpful i...

In this episode, the guys give an update on the House By Hand project (http://housebyhand.com) – the granite foundation was constructed, the sill system is in place, the ell is raised and sheathing is underway, and things are getting buttoned up for winter. Joshua and Mike discuss the ins and outs of repairing old timbers with both structural and aesthetic considerations. There’s a fine line betwe...

This episode was recorded on the heels of the first annual Apprenticeship Program Summit gathering. Alumni from the first four terms were invited to the M&T headquarters to share ideas, feast, and make shavings together. In this episode, Joshua and Mike reflect on the weekend-long happenings: the antiques examinations, the woods walk, the house timber restoration, and even the campfire songs. Coun...

In this new episode of the podcast, Joshua and Mike take up the topic of portable woodworking. They argue that even though modern woodworkers tend to feel safe “within the box” of their workshops, we would all do well to get out a little. Try taking up carving around the campfire or make a simple tool tote to bring around the yard for home repairs. In their conversation, Joshua and Mike discuss ho...

The pre-industrial emphasis of M&T never fails to generate puzzlement and questions in an age driven by technology, jigs, and devices. And as Joshua and Mike continue to interact with students and readers, they find they get the same sorts of questions over and over. This recurrence illustrates the gap between the conventional approach to woodworking and the one they spend their energies promoting...

In this episode, Joshua and Mike talk about how it is that we learn new skills. They contend that we have to get over a reductive and mechanical way of looking at human life and action. We are not machines and we don’t learn new skills by “downloading” information. Instead, we practice. Through sustained work, we begin to embody these new skills in a way that make it look easy – because, in a sens...

Power tools are dangerous. This should not be a controversial statement, but somehow the observation always incites vigorous debate. In this podcast episode, Joshua and Mike discuss Mike’s article in Issue Twelve titled “Risk & Reward: Skill as a Safety Net,” in which he tackles this delicate issue. Rather than falling back on tired clichés, Mike seeks to reframe the discussion in a way that can d...

Many woodworkers get into hand tools because they are drawn in by the joinery: dovetails, mortises and tenons, etc. As they continue building pieces in their shops, some begin to wonder if it’s possible to “cut the cord” even further. What would it be like to build from scratch without any machinery whatsoever? How would one start with rough boards and end with a beautiful drop-leaf table without...

41 – Making Wooden Planes by Mortise & Tenon Magazine

In this latest podcast episode, Joshua and Mike tackle a particularly thorny question head on: What is “craftsmanship,” exactly? While woodworkers of all kinds share a mutual appreciation for craftsmanship, surprisingly, there have been different ideas of what it even means. Is “craftsmanship” the same thing as “making” or is there something more to it? Can woodworking skill be reduced to the abil...

In this episode, Joshua and Mike don their proverbial tool belts and discuss a restoration project that will occupy the bulk of their focus in 2022 – reconstructing an 1810 New England Cape house. Starting at the beginning, before Mortise & Tenon Magazine even existed, they recount the perilous task of deconstructing the building, raccoon droppings and all. They lay out a plan for restoring and mo...

In this episode of the M&T Podcast, Joshua and Mike take a big-picture, global look at pre-industrial handcraft. This was not a region-specific or time-bound set of practices or traditions but was much more diverse and variegated than we can possibly imagine. Try to picture the breadth of creative work done by human hands before the homogenizing effects of the Industrial Revolution came into play,...

In this episode, Joshua and Mike dive into that spirited and controversial arena known and feared by all hand-tool woodworkers… Sharpening. Looking at historic references and new practices alike, they make their case for developing the skill of freehand honing – the method they teach their students in the M&T Apprenticeship Program. This method frees you from a reliance on expensive jigs and stone...

Welp… in this episode, Joshua and Mike lay their cards on the table. In case you still wondered about their thoughts on digitally meditated existence, they put it all out there, warning not only of the social implications but also of the implications for handcraft. They ponder whether we can outsource our craft and still feel a sense of ownership of the creative process? They also ask, “How can we...

In this new episode, Joshua and Mike talk about how there’s no hope of ever coming to the end of this rabbit hole. As it turns out, handcraft is a bottomless pursuit. There are so many skills, so many trades involved in the making of furniture. And, for the relentlessly curious, there is a lifetime ahead of exploration. No matter what your career, what your interest, there is so much to celebrate...

You might have to take a seat for this one; chairmaking, as it turns out, is quite a controversial thing. The recent issue of M&T (#11) features several authors holding up different takes on this ancient craft. How does an artisan work efficiently to be able to compete in the chair market? How does the use of a lathe open a can of worms that has led some to an industrial mentality? What does 20th-...

In this (occasionally tongue-in-cheek) episode of the podcast, Mike and Joshua talk about the great “Sedgwick Mobile Internet Crisis of 2021,” and how dependence on technology and infrastructure can become crippling when those rickety structures are knocked away. They discuss the concept of “resilience,” how broadening a “good,” broad skillset is more valuable than being “great” at just one thing,...