Stuff About Energy Production

Losing glycol in your Gas Dehydration system? In this episode we explain 5 common reasons and give solutions for each.  Resources mentioned in this episode:  https://kimray.com/training/top-5-reasons-youre-losing-glycol-your-gas-dehydration-process https://kimray.com/training/what-glycol-foaming https://kimray.com/training/glycol-filtration-3-types-and-how-they-work-clean-your-glycol

In this episode, we tackle seven common customer questions:  How do I size a valve?  Why is my brand-new regulator or control valve not working?   Why are your lead times so long?   What products can I substitute for something that’s unavailable?  What can I do to cut emissions?   How do I know how much my control device is venting?   Why are your valves red?&nbs...

We are joined by John Becker with Profire Energy to talk Burner Management, ESG, and Automation!  Resources mentioned in this episode:  https://www.profireenergy.com/ https://kimray.com/training/how-burner-management-system-works-automated-manual https://kimray.com/training/5-key-components-burner-management-fuel-controls

In this episode, we discuss keys to protecting yourself and maximizing your oil and production during the cold winter months.  Tips include:  Cover Exposed Skin  Point Breather Plugs Down/Downwind  Specify Elastomers for Methanol Injections  Use Catalytic Heaters  Remove Slack in Gas Tubing   Resources mentioned in this episode:  https://kimray.com/training/...

In this episode, we cover 3 reasons you might use Compressed Air to actuate your valves.  Resources mentioned in this episode:  https://kimray.com/training/3-reasons-use-compressed-air-power-your-control-valves https://kimray.com/training/solutions-fugitive-methane-gas-emissions-oil-and-gas-production https://kimray.com/training/how-convert-gas-regulator-vent-non-vent

In this episode, we define 6 key terms in oil and gas automation and explain why and how they are used.  PLC RTU I/P Positioner Transducer Solar Panels AC/DC Resources mentioned in this episode: https://kimray.com/training/6-key-terms-upstream-oil-and-gas-automation https://kimray.com/training/electric-valve-controller-easy-first-step-oil-and-gas-automation

In this episode, we discuss Burner Management Systems—what they are, how they work, key components.  Topcis include:  Direct vs Indirect Fired Vessels Manual BMS Operation and Components Automated BMS Operation and Components Resources mentioned in this episode:  https://kimray.com/training/how-burner-management-system-works-automated-manual 

Glycol dehydration systems are complex and must be closely monitored to maintain correct production. In this episode, we discuss the 7 things to check if your glycol pump isn't stroking correctly. Resources mentioned in this episode:  How to Size Your Glycol Pump Video Overview of a Gas Dehydration Unit 3 Types of Glycol Filters 

In this second of a 2-part episode, we continue our conversation with Eric Boles from CSI Compression about the various uses of Gas Compression. Big thanks to Eric for joining us on Canadian Thanksgiving! Topics include: What is typical injection pressure for gas lift? Does it differ if the well is horizontal? What causes a compressor to shut down? How do Canadian and US customers differ? Res...

In this episode, we talk with compression expert Eric Boles from CSI Compression about the various uses of Gas Compression. Big thanks to Eric for joining us on Canadian Thanksgiving!  Topics include:  Is it better to rent or buy compression equipment?  How common is it to use gas lift and plunger lift together? (GAPL) At what stage of a well is gas lift usually installed?&nbsp...

In this episode, we’re going to discuss 3 types of glycol filtration systems.  Resources mentioned in this podcast: 3 Filters and How they Work to Clean Glycol

In this episode, we talk about Gas-Assisted Plunger Lift.  Resources mentioned in this podcast: Plunger Lift: A Video Demonstration

In this second of a 2-part episode, we are joined by Tim Rickel, Engineering Manager at Arc Energy, to discuss the challenges of designing and operating natural gas dehydration systems. Topics include: How do I troubleshoot a dehy system when things go wrong?  What should I check if I'm not hitting dew point?  What is glycol foaming?  What causes glycol loss?  Resources mention...

In this first of a 2-part episode, we are joined by Tim Rickel, Engineering Manager at Arc Energy, to discuss the challenges of designing and operating natural gas dehydration systems.  Topics include:  Why do upstream companies need to dehydrate gas? What is dew point? Key components of a dehy system Resources mentioned in this episode:  Gas Dehydration System Overview Glycol Pump...

Sand is a big challenge for oil and gas producers. After it's sent downhole to frack wells, it returns to the surface during flowback and production, where it can severely damage your equipment.   In this podcast, we’re going to discuss 3 valves that help you limit sand’s impact so you can maximize well production. 
 Resources mentioned in this podcast:  Sand Solutions&nbs...

In this episode, we talk to Chris Mencor, Director of International Sales, about Coal Bed Methane Production. 

In this episode, Kyle walks through 3 signs your control valve may be too big.  Resources mentioned in this episode:  https://kimray.com/training/control-valve-sizing-3-likely-symptoms-oversized-control-valve

In this episode, Product Applications Tech Jordan Moore explains the 4 different naming conventions used to identify a Kimray product: Order Code Description Serial Number Configuration Code Resources mentioned in this episode:  https://kimray.com/training/valve-tagging-system-4-keys-identifying-your-control-equipment 

In this episode, Kyle and Curtis discuss valve end connections, including threaded (NPT) and flanged, as well as what ANSI classes mean.  Resources mentioned in this episode:  https://kimray.com/training/what-valve-flow-coefficient-cv  https://kimray.com/training/what-flange-valve https://kimray.com/sizing-calculator/gas-sizing Do you have a question you'd like us to answer on the p...

In this episode, Kyle and Curtis discuss the conditions you need to know to select the right control valve for your application.  Resources mentioned in this episode:  https://kimray.com/training/valve-sizing-3-most-important-factors-selecting-correct-control-valve https://kimray.com/sizing-calculator/gas-sizing

In this episode, Kyle explains what a control valve actuator does.  Topics include:  What are the different types of valve actuators? How does a Pneumatic Actuator work?   How does an Electric Actuator work? 3 Factors to Consider When Choosing an Actuator Resources mentioned in this episode: https://kimray.com/training/how-select-valve-actuator https://kimray.com/training/what-valve...

In this episode, Kyle explains the difference between the Maximum Allowable Working Pressure (MAWP) and Operating Pressure of a control valve.  Topics include: Data sheets—flow conditions vs. valve data What is MAWP? What is the MAWP for some commonly used valves and regulators?  For an OEM of production equipment, what is a "Coded Vessel"?  What is Valve Operating Pressure?  R...

In this episode Aaron and Curtis chat with Garrett Lee, Product Officer at Petrosmith.  Topics include: 2020 Challenges A typical day in the life of a Product Officer The importance of basic chemistry  Resources mentioned in this episode: https://www.eia.gov/petroleum/drilling/ https://petrosmith.com/ 

In this episode, Aaron and Curtis are joined by Ryan Logan, VP of Supply Chain at Westerman, Inc. Resources mentioned in this episode: https://westermaninc.com/   

In this episode, Kyle and Curtis cover 7 tips for control valve installation:  Don’t hold it by the tubing!  Install isolation ball valves Mount vertically Check fail position Make sure you have clean and dry supply gas Tighten flange connections in star pattern Use sealant for NPT threaded valves Resources mentioned in this episode:  https://kimray.com/training/7-control-valve-inst...