HVAC School - For Techs, By Techs

In this podcast episode, Bryan and Nathan discuss balancing evaporators in a multi-coil circuit. They specifically focus on using the TXV to do so. When we say "balancing evaporators" in a multi-coil circuit, we're referring to the temperature of the air leaving the system; we are worried about the air keeping the product cool in grocery refrigeration. If everything works correctly, the evaporator...

In this short podcast episode, Bryan discusses the difference between mass flow and volume flow when referring to HVAC equipment processes. When you are confused as to whether you're dealing with mass or volume flow, think about the units. For example, cubic feet per minute (CFM) is a measure of volume  because we're talking about cubic units. We care about the volume when we think about air mixin...

In this episode, Bryan and Sam discuss freezing evaporator coils. They explain why frozen coils happen and how to address them. When the coil's surface temperature drops below freezing (32 degrees), the moisture in the air that condenses on the coil can freeze to the coil. In those situations, your suction saturation will probably be in the mid to high twenties. Generally, freezing evaporators wil...

Mike Klokus and Corey Cruz from Kalos come on the podcast to talk about drain cleaning. They discuss their tips and some best practices. Approximately 50% of the calls in the light commercial division have to do with drains, and drain cleaning is a common PM procedure. The procedure starts off when you pull the panel off the air handler and look in the drain pan. Muck can accumulate in the pan and...

In this short podcast episode, Bryan talks about the differences between single-phase and two-phase refrigeration. This particular episode is about the fundamentals of physics, chemistry, and science in general. When we talk about phases, we're referring to the changes in the states of matter. We typically think of the states of matter as solid, liquid, and gas. In refrigeration systems, the refri...

In this episode, Bryan talks with Peter Capuciati and Bryan Johnson from Bluon. They discuss how refrigerant regulations keep changing and how technicians can make sense of it. We've begun phasing out R-22; the refrigerant can no longer be imported or manufactured in the United States. We can still recover and reclaim R-22, but the recovered refrigerant on the market can't meet the usual demand. R...

In this short podcast episode, Bryan talks about the differences between single-phase and two-phase refrigeration. This particular episode is about the fundamentals of physics, chemistry, and science in general. When we talk about phases, we're referring to the changes in the states of matter. We typically think of the states of matter as solid, liquid, and gas. In refrigeration systems, the refri...

Don Gillis joins us again to talk more about common types of CO2 systems and how they differ

In this episode, we are joined by three people who know a lot about heat pumps and cold weather. We also cover everything from the way technologies have changed, some of the pitfalls to keep away from, and why heat pumps work even in really cold climates nowadays. Chad Gillespie: Chad is a senior manager, part of Mitsubishi Electric's Performance Construction Team. He currently leads a national te...

Trevor Matthews is back and dropping more compressor knowledge on us. This time, he talks about demand cooling and liquid and vapor injection. In low-temperature applications, the discharge temperature would get very high and lead to oil breakdown and thermal overload, so demand cooling is a means of cooling the compressor. Demand cooling injects saturated refrigerant into the compressor body to c...

Don Gillis with Emerson joins us on the podcast to teach us the basics of CO 2 as a refrigerant. He explains how it works and its applications. Carbon dioxide is a colorless, odorless gas that is becoming an important refrigerant for commercial refrigeration (R-744). It is desirable because it has a low critical point and high triple point, so we can use subcritical (below the critical point) and...

Sam Myers of Retrotec joins Bryan and Kaleb on the podcast to discuss building performance. He also answers some of our listeners' questions. Checking airflow is important for building science as well as HVAC. However, "airflow" is vague and can refer to static pressure readings (which isn't actually "airflow" at all), air from whole-home ventilation systems, or CFM per ton. We can also look at to...

The great Ed Janowiak (Jon-Oh-Wok) joins us to talk about what correct airflow really looks like. He also explains how to design for it appropriately. The ACCA design series (Manuals J, S, and D) all go hand in hand to design HVAC systems properly for a given space. Correct airflow will depend on how a technician or designer uses the ACCA design series. When we say "correct airflow," we mean that...

Have you ever heard a compressor that keeps changing in sound as it runs? Trevor with Emerson tells us more about what that is all about and how the digital compressor operates.

Joe and Eric join us, and we have a general conversation about small self-contained refrigeration units, including residential and commercial. Small refrigeration includes self-contained reach-ins and small walk-ins. These units typically use capillary tube metering devices. Some of the biggest failures that occur in small refrigeration systems happen because of dirty condensers and user error (le...

Kaleb, Joe, and Eric join us again to discuss some myths about single-pole contactors. We also cover some weird crankcase heater wiring configurations. When you have a single-pole contactor on a unit with no other resistance crankcase heater attached, the contactor energizes the compressor but is NOT a source of crankcase heat. That myth about single-pole contactors likely stems from a misundersta...

Trevor Matthews with Emerson Canada comes on the podcast once again to talk about electronic expansion valves (also known as EEVs). He explains how they work, what they do, and how to diagnose them. Trevor compares electronic expansion valves to TXVs on steroids; they accomplish similar tasks, but EEVs have faster response times, better accuracy, and can improve system efficiency. The valve operat...

Trevor Matthews from Emerson Canada joins us on the HVAC School podcast again to talk about CoreSense by Emerson. Each CoreSense module has the potential to protect compressors. The technology can detect issues like overheating, short cycling, locked rotor, missing phase, low oil, and more. In short, the goal is to notify the technician or mechanic that something happened; sometimes, the control c...

Alex Meaney from MiTek/Wrightsoft joins us again because he's an awesome trainer and knows a thing or two about how to more out of online education for the trades. During the COVID-19 pandemic, we've seen a dramatic shift from in-person to online education. The transition has been hard on students and educators alike, but there are still ways to make it work. Preparation is the key. Before you ent...

Our good friend Trevor Matthews from Emerson Canada joins us to talk about compressors, mostly preventing compressor failure and troubleshooting issues. Whenever we're installing or servicing a compressor, we need to think about possible systemic issues right off the bat. The compressor is the heart of the system, but everything else in the system affects how the compressor runs. You'll want to kn...

In this short podcast episode, Bryan discusses the importance of suction line temperature and what it can tell you about an HVAC system. There are two main places to take your suction temperature: at the evaporator outlet and right where the suction line goes into the condensing unit. When the former number is high, you could have a starved/underfed evaporator. When the latter number is high, you...

In this podcast episode, Neil Comparetto from Comparetto Comfort Solutions joins Bryan and Kaleb to discuss some duct installation best practices he has learned. You might be able to take away some of his duct installation tips and apply them in the field. Neil used to focus a lot on making the ducts look good, but nowadays, he focuses a lot more on performance; the work of art is in the data, not...

In this short podcast episode, Bryan explains what happens to a compressor when it's overheating. He also covers possible causes and troubleshooting strategies. One of the Kalos techs came across an overheating compressor case that looked like a textbook TXV problem: the superheat was high at the condensing unit on the compressor side. However, the air handler superheat was appropriate, and the su...

In this podcast episode, Kaleb, Joe, Eric, and Bryan answer some troubleshooting and commissioning questions from Facebook. Whether we're talking about troubleshooting, commissioning, or any other HVAC/R task, the best training is on-the-job training. Meetings, educational videos, and quizzes also help to a lesser extent, but bypassing training altogether is a mistake. Senior techs can also become...