HVAC School - For Techs, By Techs

Dr. Chuck Allgood from Chemours returns to the podcast to do some refrigerant myth-busting. Many people don't understand why high-GWP HFCs can impact the atmosphere if the refrigerant is heavier than air. High-GWP HFCs exist for a long time, and they last long enough for natural mixing and the wind to distribute their molecules throughout the atmosphere. HFOs, by comparison, are more reactive in t...

Ty Branaman and Eric Kaiser return to the podcast to discuss the good, the bad, and the ugly of trade schools. They cover the opportunities and challenges they've observed in trade schools. As with for-profit colleges, for-profit trade schools market programs aggressively and can take people who are at a crossroads in their life and saddle them with debt. In some cases, trade schools are hesitant...

John Pastorello from Refrigeration Technologies returns to the podcast to talk about selecting proper cleaners for various HVAC/R jobs. From the beginning, the goal of Refrigeration Technologies has been to make cleaners that are safe but have the same effectiveness as the strong, hazardous varieties in the industry. The more hazardous cleaners are not food safe and may be corrosive, dangerous to...

Eric Kaiser and Ty Branaman return to the podcast to talk about the progression from technician to service manager and if a good tech always makes a good service manager. They discuss career paths, differing skills between technicians and service managers, and how HVAC/R companies can support techs who wish to remain techs. In many cases, top technicians are pulled into service manager positions t...

Kimberly Llewellyn from METUS joins the podcast to talk about the value system around the trades and why the trades aren't more respected. In many cases, the people who are involved in engineering and design miss the practical details that the tradespeople would be able to pick up on. In many cases, tradespeople aren't consulted early enough in the design process, and their input deserves to be br...

Eric Kaiser and Ty Branaman return to the podcast to talk about getting more people into the trade. They focus on how the HVAC/R industry could be better at attracting and training skilled workers, not just getting more bodies to fill HVAC/R tech and installer positions.  People are starting to see more value in skilled trades careers, but it's difficult to find people who share your company's val...

Genry Garcia returns to the HVAC School podcast to talk about what becoming a complete tech really means and entails. He talks about his professional journey and what we must do to address our deficiencies. Career progression looks a bit different for everyone, with some technicians going to trade school and others starting as helpers and working their way up. We get used to taking readings and st...

In this short podcast in our electrical myths series, Bryan talks about some inductive current myths. There is a common myth surrounding voltage drop in inductive loads. When you decrease the voltage in a circuit with a resistive load, you'll see a relatively proportional drop in resistance (ohms) and current in accordance with Ohm's law. So, we'll see a decrease in current, but we have to keep in...

Alex Meaney returns to the podcast to explain why it REALLY gets hot upstairs and what we can do about it. He also talks a bit about his new business. Heat technically doesn't rise; warm air is less dense than cooler air, so cooler air sinks as warmer air rises. In many cases, people blame stratification and the stack effect for warm upstairs areas, but there may actually be other issues at play,...

In this short podcast, Bryan busts the common electrical myth that single-phase 240v power is really two-phase power. When power goes into a structure that runs 240v appliances, we may understand that two 120v sine waves are 180 degrees out of phase with each other, but that isn't 100% accurate. If we were to use an oscilloscope to watch the electrical sine waves, we would see two sine waves 180 d...

Moe Hirsch joins the podcast to discuss the hydronics side of the industry, particularly focusing on Dan Holohan's Pumping Away and exciting developments in the hydronics market, especially regarding electrification. Pumping Away is many people's entry point to hydronics. It contains some good basic information about boilers, especially when it comes to learning about the pressures involved in pum...

In this short podcast, Bryan busts the myth that hard starts reduce the start current on the run winding of a compressor. A single-phase motor's main winding is the run winding; it has a lower resistance and a higher current than the auxiliary winding, also known as the start winding.  Hard start kits are often used on HVAC systems with single-phase compressors (which usually have PSC motors). The...

Andy Holt joins the podcast to talk about what it means to be a 24-Hour Technician. We talk about what it means to be HVAC/R technicians AND deal with the human aspects of our lives at the same time. Service technicians differ from installers in that they do much of their work solitarily. They spend a lot of time by themselves. They're also on their feet very often and may do emotionally exhaustin...

Jim Bergmann returns to the podcast to talk about furnace commissioning procedures and the development of measureQuick 2.0. MeasureQuick 2.0 has been a collaborative effort between Jim Bergmann and Joe Medosch, and it comes with an upgraded user interface that allows for faster operation and easier system data access and storage, and it works with more tool manufacturers' tools. Gas furnaces need...

Mike Klokus and Jeff Crable walk us through Kalos Services' light commercial PM process.  First, we verify that everyone is clear on the agreement. Then, we start the PM with a thorough visual inspection, taking copious notes about things that look concerning.  Once we've done a visual inspection, we clean the condensers. We try to use only water when possible, though safe cleaners may be necessar...

In this short podcast, Bryan covers a common electrical myth about wire length and its relationship with the National Electrical Code. The NEC is concerned with safety—protecting buildings and people—but less so with making sure things work. Wire sizing is a common topic, and length is important because it can contribute to the voltage drop in a circuit. In many cases, we refer to the MCA (minimum...

Trevor Matthews, the founder of Refrigeration Mentor, returns to the podcast to talk about why CO2 matters in commercial refrigeration and even HVAC applications. CO2 (R-744) has entered the residential HVAC sphere in some places around the world, though it hasn't come to the North American markets yet. CO2 is one of the most eco-friendly refrigerants on the market, with a GWP of 1, and it's very...

This podcast is Bryan's full-length electrical basics class for the Kalos technicians. He covers electrical theory and circuit basics. Volts, resistance, and amps all affect the behavior of electricity in circuits. These are also critical factors in electrical safety. Watts and kilowatts come from the multiplication of the volts and amps, though not every volt-amp does work; the power factor indic...

In this short podcast, Bryan debunks the myth that electricity only takes the path of least resistance. It is true that more current will typically take paths of lower resistance; it's much easier for more electrons to flow through a path with lower resistance, which is consistent with Ohm's law. Ohm's law states that a circuit will have higher current with you have lower resistance so long as the...

Nikki Krueger from Santa Fe Dehumidifiers returns to the podcast to talk about dehumidification equipment and strategies in the shoulder seasons (spring and fall). The shoulder seasons (and the weeks leading up to them) are when many homeowners begin to notice moisture problems in their homes. HVAC units and dehumidifiers should have a king-queen relationship. The HVAC unit is the king and control...

In this short podcast episode, Bryan gives some quick tips for time management. You can save a lot of time by prioritizing what really matters and delegating tasks. One of the simplest but most effective ways to manage your time is to use a calendar. You can even apply the calendar to your personal life; you can get into a habit of scheduling important appointments, deadlines, and tasks. Google Ca...

Eric Kaiser returns to the podcast to talk about how to become a better mentor. He explains the topic from the perspective of a mentor and a mentee. The goal of mentorship is to pass your knowledge on to someone else. When you give someone the knowledge to succeed in the HVAC/R trade, you move the trade forward and allow yourself to try new career opportunities when someone can replace you. Some o...

Eric Kaiser joins the HVAC School podcast to talk about HVAC measurement types and the benefits of taking each one. He also talks about point measurements and data trends. Point measurements include static pressure, voltage readings, and readings provided by gauges. We only take those measurements once. However, when you track those on several occasions over time, you can build data trends. Single...

Genry Garcia joins the podcast to give an intro to ASHRAE Standard 62.2. He and Bryan also share a nice rant about accountability in HVAC design. Standard 62.2 is the ventilation standard for low-rise residential buildings, which dilutes airborne contaminants like VOCs and CO2. Before coming up with a ventilation strategy, we need to assess the leakage rate of the building, such as via a blower do...

RACT manual co-author Eugene Silberstein joins the podcast to talk about the titular topic of his book, Pressure Enthalpy Without Tears .  Pressure Enthalpy Without Tears is a book that introduces engineering concepts to HVAC technicians in a way they can understand and apply in the field. Enthalpy is a fancy way of saying "heat," and we use it to refer to the total heat content (BTUs). The pressu...