HVAC School - For Techs, By Techs

In this podcast, Bryan Orr and Bert discuss various aspects of pool heaters, focusing on issues that make them different from typical HVAC systems. They cover the basics of pool heaters - the main types (heat pumps and gas heaters) and how they operate similarly or differently from things HVAC techs work on regularly. The bulk of the 45-minute podcast looks at common service and troubleshooting si...

In this short episode, Bryan explains the fundamentals of capacitance, focusing on the unit of measure: farads, including micro and pico. Farads are named after scientist Michael Faraday and measure capacitance; one farad represents the capacitance of a capacitor in which one coulomb of charge causes a potential difference of one volt across the plates. Farads measure the storage of electrical ene...

Bryan Orr hosted a live podcast discussion all about 90% efficient furnaces with HVAC professionals Ty Branaman, Adam Mufich, and Matthew Bruner. They covered the basics of how 90% furnaces work compared to traditional 80% furnaces, troubleshooting tips, and best practices for installation and service. A key difference with 90% furnaces is the addition of a secondary heat exchanger that extracts m...

In this short podcast, Bryan breaks down the differences between analog and digital sine waves. Analog readings deal with an unlimited number of values; they are very precise and can have any number of decimals. As a result, the alternating current (AC) analog sine readings have very smooth curves when we read them on an oscilloscope (in the US, we see 60 peak-and-valley cycles per second because...

Bryan Orr interviews Tyler Nelson, an HVAC expert with over 20 years of experience as a contractor. They have an in-depth discussion about combustion analysis and why it is becoming increasingly important for HVAC technicians to utilize this process. The conversation provides an overview of combustion analysis benefits and why HVAC pros should incorporate it into their standard operating procedure...

In this short podcast, Bryan talks about checking the charge of a heat pump in heat mode. This skill will become more critical as ambient temperatures get cooler. The most reliable way to check and set the charge regardless of operating mode and season is to weigh the charge. This method is most practical during installation and commissioning, and proper commissioning can prevent issues with charg...

Nikki Krueger and Genry Garcia return to the podcast to talk about a recent IAQ & dehumidification case study on a vintage home in Miami. The home was very clean but had a musty odor and VOC concerns. You can read the case study in the "Literature" section at https://www.santa-fe-products.com/about-us/media-resources/ or https://hvacrschool.com/case-study .  Blower door tests and ZPD revealed that...

Skilled trades entrepreneur Tommy Mello joins the podcast to talk about creating a business where everyone wins: business owners, employees, vendors, AND customers. Tommy's main motivations in business are relationship-building and helping employees make a good living. Those motivations contribute to the development of company culture; even though cultures build themselves naturally, developing th...

Refrigeration Mentor Trevor Matthews returns to the podcast to share some of his tips for supermarket rack service. The supermarket refrigeration world is ripe with high-paying opportunities and uses similar skills that HVAC technicians use daily. Switching from HVAC to refrigeration will require a little bit more attention to some new components, especially controls and control systems. Technical...

In this short episode, Bryan covers traps, vents, and drains. He explains some common misconceptions and best practices for fabricating drains, especially in residential and light commercial structures in Florida. Cleanouts and vents are commonly confused with each other, and people often cap vents and leave cleanouts open. However, cleanouts (which must be capped) will always be  before the trap,...

HAVEN IAQ founder and CEO Kevin Hart returns to the podcast to discuss cracking the home health comfort code, diving into IAQ's illusory ideals. Even though the industry has been generating well-thought solutions to common problems, it's difficult to put those solutions into practice on a large scale. As a result, it's common to rely on selling "bolt-on" IAQ products, which don't actually solve sy...

In this short podcast episode, Bryan goes over a few tubing insulation tips. Tubing insulation is also commonly known as Aeroflex, Armaflex, and Thermaflex—all brand names for black copper line set insulation. We typically have to insulate just the suction line in typical residential split HVAC systems, but you'll typically have to insulate both lines in ductless/VRV/VRF or refrigeration applicati...

Jim Fultz returns to the podcast to talk about the new HSI module from White-Rodgers, the 50E47U-843. You can learn more about this new universal HSI module at https://hvacrschool.com/hsimodule .  Hot surface ignition modules control the burner for gas appliances that use hot surface ignition, not just furnaces. Since the HSI module doesn't need to work with a blower fan, it can be used in water h...

In this short podcast episode, Bryan talks about locked compressors and hard starts. He explains what actually happens when a compressor locks and covers when and how to use hard starts appropriately.  Locked compressors are compressors that trip on overload during startup; they're considered "locked" because the rotor doesn't turn inside the stator and generates heat instead. The overload opens,...

Licensed mechanical engineer Tony Amadio joins the podcast to talk about residential exhaust codes and best practices. He also put together a presentation about the topic, which you can view at  https://hvacrschool.com/exhaust .  When choosing duct materials for residential exhaust, you will want to stick to sheet metal and mind the gauge; flex ductwork can easily be damaged and will rack up a hig...

Phil Barr and Nathan Orr join the podcast to talk about wiring refrigerated cases in commercial spaces, including convenience stores and supermarkets. Cases may be medium-temp (or high-temp, in some cases) or low-temp. Medium-temp cases can typically defrost on their own during the off cycle, and low-temp cases may have electric or hot-gas defrost to help get ice off the coil at set intervals. Eac...

This podcast is a class taught by Bryan: Things to Keep Out of the System. He covers some installation best practices along the way to keep contaminants and non-condensable gases out of the system. We want to keep air, water, dirt, copper shavings, solvents, and nitrogen out of an operating system. All we want in an operating system is the appropriate oil and refrigerant for the system. Unfortunat...

In this short podcast, Bryan talks about air changes per hour, also known as ACH, and what it means in HVAC design and indoor air quality (IAQ) discussions. ACH tells us how frequently the entire volume of air in a room or structure is replaced; we are referring to the cubic feet of air leaving a space and then being replaced within that same space. If we have a balanced number of cubic feet per m...

Roman Baugh joins the podcast to talk about oil return and the refrigerant charge in VRV systems. VRV systems—also known as variable refrigerant volume (or variable refrigerant flow/VRF) systems—have one outdoor unit, one or multiple compressors, and multiple indoor units. The outdoor unit modulates to meet the indoor units' fluctuating demands. They are versatile and flexible systems. Like parall...

In this short podcast, Bryan talks about oxidation and all the buzz behind "magical air-cleaning oxides" and other similar IAQ products. Oxidation is the loss of electrons, and reduction is the gain of electrons; oxygen commonly loses electrons. Rusting is a common example of oxidation; it happens when iron and oxygen interact in air or water. Metals that are more likely to react with oxygen (or c...

In this short podcast, Bryan talks about filtration and IAQ, especially as they relate to virus control. He also answers the age-old question: "Can filters capture viruses?" While it may seem like particle size matters when it comes to filter efficacy, filters are not nets that strain air particles and prevent pollutants from passing through. When we talk about particles, we tend to focus on ones...

Joey Henderson returns to the podcast to talk about heat pumps and inverters. The reversing valve, defrost cycles, and auxiliary heat can cause confusion for people who have primarily worked with furnaces or straight-cool A/C systems. Heat pumps use defrost cycles and bring on the auxiliary heat when the coil is ice-bound, which can present a challenge; we need to maintain cold coils without going...

Joey Henderson joins the podcast to talk about airflow and how we can get air where it needs to go. Duct design is one of the subjects that fuel Joey's passion for HVAC. In many cases, people focus too heavily on the equipment when diagnosing airflow problems; sometimes, the equipment simply can't perform as it should due to a poorly designed duct system. In residential HVAC, many duct systems are...

This podcast episode contains some of the questions and topics from the Business Round Table at the 4th Annual HVACR Training Symposium. Panelists include Tersh Blissett, Luke Peterson, and Andy Holt. One of the most critical parts of HVAC business ownership is knowing when to grow your business (i.e., hiring more techs and incorporating standalone maintenance and install departments). Ultimately,...

In this short podcast, Bryan goes over some information about cap tubes (capillary tubes) and flow facts. Cap tubes are metering devices; they're long tubes with small diameters, and their flow rates are dictated by the tubing diameter size and tube length. Pistons and TXVs are some of the most common metering devices in residential HVAC, and flow restriction doesn't just happen at the metering de...