HVAC School - For Techs, By Techs

In this short Q&A podcast episode, Bryan answers Edward's question about how to deal with customers who ask, "Why didn't you notice it last time?" There isn't an easy answer to that question. The truth is that air conditioning and home health and comfort issues are complicated, and it's entirely possible that an issue simply went unnoticed (or the symptoms simply weren't apparent yet). The HVAC in...

In this episode of the HVAC School podcast, host Bryan dives deep into the topic of vacuum in HVAC and refrigeration systems. He addresses two questions from social media about vacuum, expanding them into a comprehensive discussion of best practices, common issues, and techniques for effective vacuum procedures. Bryan starts by explaining where to ideally locate a vacuum pump when working on a ref...

In this short Q&A podcast episode, Bryan answers a question about drain traps and static pressure. This question was sent by Stephen with The Comfort Squad when he noticed an uptick in nuisance calls on retrofit systems that kept having their secondary drain pans filled. In negatively pressurized systems (i.e., straight-cool or heat pump units, not gas furnaces), air can pull water back into the d...

In this informative episode, Bryan Orr speaks with Andre Patenaude from Copeland about CO2 refrigeration systems. They dive deep into the unique characteristics and challenges of working with CO2 as a refrigerant, providing valuable insights for HVAC and refrigeration professionals looking to expand their knowledge in this growing field. Andre explains the reasons behind the increasing adoption of...

In this short Q&A podcast episode, Bryan answers Kenton's question about how to stop vents from condensating, especially when sealing and insulation don't do the trick. When approaching a condensation problem, we have to consider the source of moisture and where the condensation is happening. Moisture that builds up on top of the vent comes from attics with a high dew point. (It's not because hot...

In this episode, Bryan and Max discuss commercial supermarket startup and commissioning with comparisons to residential HVAC work. Max, who has transitioned from residential air conditioning to supermarket refrigeration, shares his insights on the unique challenges and requirements of this specialized field. The conversation begins by emphasizing the critical importance of safety in supermarket re...

In this episode, Matthew Taylor joins the podcast to dive deep into the world of pressure-limiting valves and regulators used in refrigeration and air conditioning systems. They explore the intricacies of Maximum Operating Pressure (MOP) expansion valves, Evaporator Pressure Regulators (EPR), and Crankcase Pressure Regulators (CPR), discussing their functions, applications, and differences. The co...

In this episode of the HVAC podcast, Bryan and Max Johnson from Kalos discuss the critical role of a startup and commissioning technician in the HVAC industry. Max, who has experience in both residential and commercial HVAC, shares his insights on the importance of understanding the scope of work, equipment specifications, and code requirements. One of the key responsibilities of a startup and com...

In this short podcast of the Q&A series, Bryan answers a question about "stubborn old techs" (submitted by Luke via Speakpipe). In several cases, old-school techs are "being positional," which means they feel that they have a piece of turf to protect; they see challenges to the status quo as a threat. They may want to defend the way that they do and have always done things. Many of these people al...

In this episode, Josh Souders from Copeland joins the HVAC School Podcast to discuss modulating and variable capacity technologies in HVAC systems. Josh provides an in-depth look at the different levels of modulation available in residential HVAC equipment, from traditional fixed-speed systems to two-stage, multi-stage, and true variable-speed compressors. The conversation covers the benefits of m...

In this short podcast episode of the Q&A series, Bryan answers a question about testing dehumidifiers (submitted by Steven via Speakpipe).  Dehumidifiers run air over a cold evaporator coil (to pull moisture out of the air and drain it out) and then reheat it over a condenser coil. The air leaving a dehumidifier is of a higher sensible temperature than the air going in, but there are fewer overall...

In this episode, we dive deep into the world of residential HVAC installations and improving changeout outcomes with Matt, a senior technician and residential install supervisor at Kalos Services. Matt brings a wealth of experience from both the service and installation sides of the business, offering valuable insights into improving installation processes and workmanship. The conversation highlig...

In this short podcast, Bryan talks about how to pay close attention to airflow issues and use your "spidey sense" when you're doing a visual inspection or commissioning a system. He also covers some causes of common airflow problems and some services and upgrades you can offer to your customers. The skill of being able to use your senses and notice when something isn't quite right is a valuable on...

In this episode, Bryan and Bert dive deep into the world of low voltage wiring in HVAC systems. They discuss common mistakes, best practices, and troubleshooting techniques that technicians and contractors should be aware of when dealing with control wiring. The conversation begins with a focus on mechanical issues, such as running wires in places where they can be damaged and poor splicing techni...

In this short podcast from our Q&A series, Bryan answers a viewer question and implores you to STOP overthinking in the trade! He also shares a parable and some tips to help stop overthinking, especially if you're just starting out in the trade. In many cases, the simplest assumption is the right one (this is called Occam's Razor). We can always start with the most obvious or simplest possible ans...

In this podcast episode, Bryan and Dre discuss the challenges and opportunities of stewarding younger techs in the HVAC industry. They explore the growing interest among young people in trades like HVAC, noting a shift away from traditional four-year college paths. The conversation highlights the satisfaction that comes from working with one's hands and the tactile nature of the trade. The discuss...

In this short podcast, Bryan answers a listener-submitted question about duct smoke detector facts and wiring. He focuses on Honeywell duct smoke detectors (namely the D4120W), but there are some general best practices that can be applied to most duct smoke detectors. The power supply may be 24v or 120v AC or DC and may have multiple inputs. You should not break that constant power source. There a...

In this episode of the HVAC School podcast, host Bryan and guest Jesse Stewart from NAVAC discuss the generational divide in the HVAC industry and the importance of embracing new technologies and processes. They explore the challenges faced by both experienced technicians who may be set in their ways and newcomers to the trade who need proper mentoring. Jesse emphasizes the importance of respectin...

In this short podcast episode, Bryan dives into soft start & solar technology, which often work together. He also talks about how we can install ductless systems in homes that rely on solar power. Soft starts are NOT hard starts. Hard starts add more current to the start (auxiliary) winding, which creates a stronger phase shift. Instead, soft starts control the current on the start and run winding...

In this episode of the HVAC School podcast, host Bryan Orr welcomes Matt Bruner to discuss the concept of a "summer survival guide" for HVAC professionals. They explore strategies for maintaining work-life balance during the busy summer season and share personal experiences on prioritizing family and personal well-being while managing the demands of the HVAC industry. The conversation delves into...

In this short podcast episode, Bryan answers a listener-submitted question: How do inverter air conditioners work? Inverter-driven systems have variable capacity to match loads. We can provide cooling or heating BTUs to match the needs of the space without overcompensating or undercompensating and causing temperature swings. Load matching also helps us get better efficiency out of the system. High...

In this episode of the HVAC School podcast, host Bryan Orr interviews Tim De Stasio, an experienced HVAC practitioner and consultant. Tim shares his journey in the HVAC industry, from his early days in vocational school to running his own contracting business for 12 years. He now focuses on consulting, design, and contractor training, allowing him to pursue his passion for HVAC while sharing his k...

In this short podcast episode, Bryan shares some strategies for teaching communication confidence, which may come in handy if you have newer techs who feel nervous or struggle to communicate with other people. The main way to build confidence is to get them to talk in the first place. Scripts and roleplay scenarios during training can help get people used to speaking and give them a reference. Whe...

This episode focuses on understanding and effectively utilizing various refrigeration system charts and measurements for troubleshooting and diagnostics. Joey Henderson, an HVAC veteran and trainer, shares his wealth of knowledge and experience on this topic. Joey starts by discussing the challenges he faced early in his career when trying to make sense of the confusing charts with arrows indicati...

In this short episode, Bryan talks about wiring in condenser fan motors, including aftermarket motor considerations and the different wire configurations. When condensing fan motors fail, we need to know what to use to replace them. We often use PSC motors, though in cases when we replace a motor with an ECM, we still need to match the horsepower despite the increased flexibility. The motors we ty...