Hackaday Podcast

Hackaday Editors Elliot Williams and Al Williams sat down to compare notes on their favorite Hackaday posts of the week. You can listen in on this week's podcast. The guys talked about the latest Hackaday contest and plans for Hackaday Europe. Plus, there's a what's that sound to try. Your guess can't be worse than Al's, so take a shot. You could win a limited-edition T-shirt. In technical article...

Hackaday Editors Elliot Williams and Tom Nardi discuss all the week's best and most interesting hacks and stories, starting with Canada's misguided ban on the Flipper Zero for being too spooky. From there they'll look at the state-of-the-art in the sub-$100 3D printer category, Apple's latest "Right to Repair" loophole, running UNIX on the NES (and how it's different from Japan's Famicom), and the...

Last week, we held an Episode 256 celebration round-table, but Kristina and I also met afterwards to talk about all the week's hacks.  That part didn't fit, but we didn't want to deprive you of your weekly hack fix either, so here they are!

For this week's episode, we did something super special -- we all convened to answer your burning questions about your hosts, both as hackers and as humans. We kick things off with a segment featuring a hearty round-table discussion between Elliot, Al, Dan, Kristina, and Tom. What's on our benches? What do we type on? Go find out! None of us figured out What's That Sound though a few of us had som...

This week, Dan joined Elliot for a review of the best and brightest hacks of the week in Episode 0xFF, which both of us found unreasonably exciting; it's a little like the base-2 equivalent of watching the odometer flip over to 99,999. If you know, you know. We had quite a bumper crop of coolness this week, which strangely included two artifacts from ancient Rome: a nanotech goblet of colloidal go...

This week Hackaday Editors Elliot Williams and Al Williams chew the fat about the Haier IOT problem, and all other top Hackaday stories of the week. Want to prove your prowess at C programming? Take a quiz! Or marvel at some hairy display reverse engineering or 3D-printed compressor screws. On the lighter side, there's an immense water rocket. After Al waxes nostalgic about the world of DOS Extend...

This week Hackaday Editors Elliot Williams and Tom Nardi start things off with a traffic report from the Moon, which has suddenly become a popular destination for wayward robots. [caption id="attachment_657278" align="alignright" width="300"] Anonymizing an ATtiny85 via laser[/caption] From there, they'll go over a fire-tending contraption that's equal parts madness and brilliance, two decades of...

This week, Editor-in-Chief Elliot Williams and Kristina Panos met up to discuss the best hacks of the previous week. It's CES time once again in Las Vegas, and you know what that means -- some wacky technologies like this AI pet door that rejects dead mice . Then it's on to What's That Sound, which Kristina managed to nail for once. Can you get it? Can you figure it out? Can you guess what's makin...

Welcome to 2024! This time around, Elliot and Dan ring in a new year of awesome hacks with quite an eclectic mix. We kick things off with a Pluto pity party and find out why the tiny ex-planet deserved what it got. What do you do if you need to rename a bunch of image files? You rope a local large-language model in for the job, of course. We'll take a look at how pinball machines did their thing b...

This week in the Podcast, Elliot Williams is off at Chaos Communication Congress, hearing tales of incredible reverse engineering that got locomotives back up and running, while Al Williams is thinking over what happened in 2023. There's a lot of "how things work" in this show, from data buoys to sewing machines to the simulated aging of ICs. Whether you're into stacking bricks, stacking Pi Picos,...

'Twas the podcast before Christmas, and all through the house, the best hacks of the week are dancing around Elliot and Tom's heads like sugar-plums. Whatever that means. Before settling their brains in for a long winter's nap, they'll talk about the open source software podcast that now calls Hackaday home, the latest firmware developments for Google's Stadia controller, high-definition cat video...

This week, Elliot sat down with Dan for the penultimate podcast of 2023, and what a week it was. We started with news about Voyager; at T+46 years from launch, any news tends to be bad, and the latest glitch has everyone worried. We also took a look at how close the OSIRIS-REx mission came to ending in disaster, all for want of consistent labels. Elliot was charmed by a Cthulhu-like musical instru...

This week, Editor-in-Chief Elliot Williams and Kristina Panos met up to discuss the best hacks of the previous week. We have no nerdy news this week, but is that necessarily a bad thing? Speaking of nothingness, we have no winner for What's That Sound? because all six people who responded were wrong. Was the sound of Clippy too obscure? But then it's on to the hacks, beginning with an awesome auto...

It's the week after Thanksgiving (for some of us) and if you're sick of leftovers, you're in luck as Elliot and Dan get together to discuss the freshest and best inter-holiday hacks. We'll cue up the "Mission: Impossible" theme for a self-destructing flash drive with a surprising sense of self-preservation, listen in on ET only to find out it's just a meteor, and look for interesting things to do...

This week, Editor-in-Chief Elliot Williams and Managing Editor Tom Nardi link up through the magic of the Internet to go over some of their favorite stories from the last week. After revealing the bone-chilling winners of this year's Halloween contest, the discussion switches over to old-timey automatons, receiving deep space transmissions with a homebrew antenna that would make E.T. proud, and th...

This week, Editor-in-Chief Elliot Williams and Kristina Panos met up to discuss the best hacks of the previous week, at least in our opinions. After chasing the angry bird away from Kristina's office, we go to the news and learn that we're in the middle of a solar conjunction Essentially, the Sun has come between Earth and Mars, making communication impossible for about another week. Did you know...

With solder fumes from Supercon badge hacking still in the air, Hackaday's Elliot Williams and Al Williams met to compare notes about the conference talks, badge hacking, and more. Tom Nardi dropped by, too. Did you miss Supercon? It isn't quite the whole experience, but most of the talks are on our YouTube channel, with more coming in the weeks ahead. Check out the live tab for most of the ones u...

This week, Editor-in-Chief Elliot Williams and Kristina Panos met up from their separate but equally pin drop-quiet offices to discuss the best hacks of the previous week. Well, we liked these one, anyway. First up in the news, it's finally time for  Supercon ! So we'll see you there? If not, be sure to check out the talks as we live-stream them on our YouTube channel ! Don't forget -- this is you...

Hackaday Editors Elliot Williams and Tom Nardi meet up virtually to talk about the week's top stories and hacks, such as the fine art of resistor trimming and lessons learned from doing overseas injection molding. They'll go over circuit bending, self-driving cars, and a solar camera that started as a pandemic project and turned into an obsession. You'll also hear about Linux on the Arduino, class...

Date notwithstanding, it's your lucky day as Elliot and Dan get together to review the best hacks of the week. For some reason, film photography was much on our writers' minds this week, as we talked about ways to digitalize an old SLR, and how potatoes can be used to develop film (is there a Monty Python joke in there?) We looked at a 3D printer design that really pulls our strings, the custom in...

Elliot Williams and Al Williams got together again to discuss the best of Hackaday for a week, and you're invited. This week, the guys were into the Raspberry Pi 5, CNC soldering, signal processing, and plasma cutting. There are dangerous power supplies and a custom 11-bit CPU. Of course, there are a few Halloween projects that would fit in perfectly with the upcoming Halloween contest (the deadli...

Elliot Williams and Tom Nardi start this week's episode off with some deep space news, as NASA's OSIRIS-REx returns home with a sample it snapped up from asteroid Bennu back in 2020. From there, discussion moves on to magical part sorting, open source (eventually...) plastic recycling, and the preposterously complex method newer Apple laptops use to determine if their lid is closed. They'll also t...

This week, Editor-in-Chief Elliot Williams and Kristina Panos gathered over the Internet and a couple cups of coffee to bring you the best hacks of the previous week. Well, the ones we liked best, anyhow. First up in the news, we've got a brand-spankin' new Halloween Hackfest contest running now until 9AM PDT on October 31st! Arduino are joining the fun this year and are offering some spooky treat...

Elliot and Dan got together this time around to recap the week in hacks, and it looks like the Hackaday writing crew very much had cars on their minds. We both took the bait, with tales of privacy-violating cars and taillights that can both cripple a pickup and financially cripple its owner. We went medieval -- OK, more like renaissance -- on a sawmill, pulled a popular YouTuber out of the toilet,...

Name one other podcast where you can hear about heavy 3D-printed drones, DIY semiconductors, and using licorice to block laser beams. Throw in homebrew relays, a better mouse trap, and logic analyzers, and you'll certainly be talking about Elliot Williams and Al Williams on Hackaday Podcast 235. There's also contest news, thermoforming, and something that looks a little like 3D-printed Velcro. Ell...