Another Woodshop Podcast

Episode 58 - Dan is working on the basemen, made preparations of the CNC landing next week and the Guys landing the week after. Mike had his big meeting with the client in regards to the large elm live edge waterfall conference room table, he’s also finishing up the herringbone coffee table, finally catching up on Etsy orders, working on some fun guitar projects, and hopefully getting his money ba...

Episode 57 - Izzy built an addition onto their shop, worked on his beast of a CNC thats 5x25 FEET LONG! Redesigning a new Dust Collection System for the Avid CNC. And working on a secret clamp storage project that he’s developing. Pete has been restoring several Stanley hand planes, and flattened the bottoms by lapping them a granite slab with a sandpaper. After flattening all the planes in his sh...

Episode 56 - Dan has been doing an on site install for his customer. However, he Dunlap’d the install by 1/4 of an inch. But its all good! Mike has been working on some table builds, knocking out more etsy orders, migrating his website, installing a carport, and awaiting a large lumber order to keep up with orders. Lastly he’s landed a large commercial job that he’s finalizing now! Pete had mainte...

Episode 55 - Dan is building a bunch of lower cabinets. And he’s been trying out some new finishes from sherwin Williams. Mike is working on a ton of behind the scenes stuff, shipping a bunch of orders, working on a sign for another woodworker, milled up ash for a coffee table, and is making plans for the redwood bench but out of store bought cedar or redwood. Lastly he’s making a table for his pa...

Episode 54 - Vik from the stump shop is here!! Vik is working on home projects and a stump with a bowtie zipper. Pete is working on moving over to fusion 360 for his CNC work, he’s working on a CNC cut corner shelf, and he’s working with Emma (his wife) on creating a Clubhouse group that revolves around “the couple hustle”. Mike had to rework a game board tray holder for a client, made a spraying...

Episode 53 - Dan Wrapped up and delivered the Cherry bed frame to his client which he had to deliver to him a ways away. Pete had a busy work week and taught his dad some woodworking in the evenings. And Mike is testing out some new equipment he added to his spray system.  Sign up for Patreon for Early access, and special Patreon-only content: https://www.patreon.com/anotherwoodshoppodcast Voicema...

Episode 52 - Dan has nothing on his bench. It’s all on his floor. It’s a cherry bed! And he also delivered the Tetris shelf. Lastly he’s getting started on a large trim project where he will be customizing a whole basement. Pete is working his CNC ragged, had an issue with static electricity in his dust collection, started plans on a knife cabinet, and is working on a knife cabinet. Mike finished...

Episode 51 - Mike had a rough week, working on the second bench, landed a mega job for a commercial company, and he's been getting slammed on Etsy. He’s also starting up some work on some future projects and is applying around with a new job management software. Dan is working on the Tetris shelf and is starting to put some finishing touches on the shelf including spraying, did some mudding w...

Episode 50 - Dan is till working on his giant Tetris shelf. Pete worked on a custom sign with CNC working epoxy and he’s in love. And Mike is working on a large bench build again and had a massive surge of orders on Etsy. Sponsor: MacBeath Hardwood https://www.instagram.com/macbeathhardwood/ https://www.macbeath.com/email-signup Sign up for Patreon for Early access, and special Patreon-only conten...

Name: Dancing with the Czars Episode 49 - Dan is working on a massive “cutting board” shelf.  He needs to utilize rabbets, dominos, and and dados. He's also starting on a queen size cherry bed. Lastly he is in the planning stages of the massive basement trim/remodel. Pete has been working on several maker projects. He made some custom double sided two sided rulers on the laser, got some forms...

Name:  Episode 48 - Mike is working on two coffee tables, fills wood with epoxy, Made a bid sheet for organizing his pricing, and he’s stoked to try out his new sprayer. Pete, designed some new stuff to 3d print for his Etsy, took on a bunch of small commissions, and has been playing around with some new 3mm plywood on the laser. Dan finished a coffee bar for his clients, a custom cutting board, a...

Episode 47 - Dan got a new truck! Silverado…big deal. He took on a few new commissions. And he made his own plywood! Mike is getting a ton of inquiries! He sent out some quotes and getting some good responses. He might sub contract out to someone for the extra workload. Working on a walnut slab and redwood slab coffee tables. Pete was sick, worked on his new 3D printers and got them tuned. He also...

Episode 46 - Dan is working on the teak floor, and he is working on a coffee bar as well as the giant ridiculous bookcase. Pete had a rough week. Worked in NYC a few days so it threw off his flow, he finally got his new bandsaw and 3D printers, and upgraded a few other small tools around the shop. He also got a storage unit to clean up the shop of some things that are not being used in this shop....

Episode 45 - Paul Jackman is here - He talks shop, pallets, and large projects. Dan is working on the teak shower floor and looking to hire some additional help. Mike is working on 3 tables, and an elm desk for his loft. Pete is knocking out a bunch of custom orders on his printer, CNC, and laser. Paul Jackman is working on…well, I guess you’ll have to listen to find out! Sponsor: Bear Hollow http...

Episode 44 - Dan is working on a a teak shower floor, he is refinishing a desk, ordered onefinity CNC and was gifted a real big boi drill press. Pete lost a bunch of packages by leaving them inside a post office, he cleaned shop of all the offcuts and he made some shop organization projects. Mike has been making some shop furniture to organize scraps, made a badass tool wall on the CNC, and is wor...

Dan is working on stair posts, teak shower floor, and. He’s hopefully starting the bookshelf soon. He also has a design consult for a coffee bar with a client. Mike got a lot of work done in the shop for the shop. All quality of life stuff. He also flattened some slabs and jointed them for himself and a client. Pete made a miter station, sanding station, and re-worked his plywood storage. He also...

Episode 42 - When you're here, you're family! Dan was wrapping up some last minute cutting board orders. He will be starting the large walnut bookcase soon. and he installed the floating hickory shelves. He will also be wrapping a mantle in hickory. Dan even released a video! Pete and Dan got the same track saw for Christmas and they're in love...with the saw...and each other. Pete...

Episode 41 - Dan is making cutting boards until Christmas and then going back "real projects". He also had a local woodworker stop by and helped him put a bow tie in the tabletop. Pete is working on cutting boards as well, and lasering everything he can. He also had a big winter storm hit. Mike has also been working on cutting boards, holiday orders, and he also got commissioned for anot...

Episode 40 - Dan is knocking out some cutting boards, took a deposit on a large book case, and is making some sales on Etsy. Pete did a mosaics and mimosas on Sunday with the girls, helped a local woodworker get caught up on orders, loaded up on lumber for some projects, and his laser was delivered!! Mike has been knocking out his Etsy sales, closed shop to new orders, and delivered the redwood be...

Episode 39 - Dan is working on some hickory boards and mantle pieces. He also needs to make railings and posts from Alder. Lastly he’s making some charcuterie and cutting boards to fill his new Etsy Shop (Check it out!). Mike is knocking out a bunch of custom email and Etsy orders. He’s also swapping up the bench build! He’s got some help coming in the shop this weekend. Pete is making cutting boa...

Episode 38 - Dan is finishing up  the barnwood doors, masking some cutting boards (but not finishing them), and refinishing some stair treads for a client. Mike was sick all week, but feeling better, wrapping up the redwood bench, working on some custom trays, and he set up his laser! Pete is painting wooden paneling, making a bunch of cutting boards, taught a private class, making cherry swing se...

Name: The Littlest WEN Drill press  Episode 37 - Dan got poisoned, and he knocked out a cool desk for his son. Dan also opened an Etsy Store! Pete is throwing out a bunch of crap from around his shop to make some more room for projects. Mike is sick! He is building some shed doors from baked poplar, the CNC has been busy this week, he’s working on a large redwood bench, and he got a freakin laser...

Episode 36 - Jef From TwoMooseDesign is here! Jef talks about their business. He’s working on a whole set of orders, trays, clocks, CNC projects (More this week than we do in a year). Mike is working on CNC projects as well, a tray, templates, and some flags. He also Installed Windows on his house and it now has malware. Pete has been designing more tool and battery holders, catching up on some ad...

Episode 35 - Dan is working on barn wood doors, made a cabinet for his saw, and has been busy being a photographer. Pete made a bunch of bougie French cleat holders and he’s been Ikea hacking his Mega Desk. Mike has been sick and out of commission for a bit, made a larger personalized tray, he’s planning out the bench build, and he’s got some large projects coming up! Sponsor: StickerBeat https://...

Justin is finally here!!! Justin is putting some finishing touches on a kitchen island, he talks working with brands and engaging the community. Dan’s got nothing….absolutely nothing, moving on! Jk Dan is doing a lot of photography. Pete is playing with his new Mirka DEOS (that Dan also got) and also getting more practice with his camera. And he’s making a ton of french cleat wall holders. Mike is...