Adafruit Industries

You can get 3D printed parts in clear resin using the 3D printing service from PCBWay. This video is not sponsored or affiliated with PCBway and the parts seen here were purchased on our own behalf. Learn Guide: https://learn.adafruit.com/clear-resin-3d-prints-with-pcbway/ These parts feature a crystal clear surface finish that’s reminiscent of the transparent gadgets of the 1990’s. They were 3D p...

Bo-katan Helmet By FRALANS3D https://cults3d.com/en/3d-model/various/bo-katan-helmet-replica-the-mandalorian-version CR10S Pro V2 Burnt Titanium PLA 60mm/s 48hr 10mins X:262 Y:257 Z:218mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 500g Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord A...

This weekend we whipped up a quick FUSB302 (https://www.digikey.com/en/products/detail/onsemi/FUSB302MPX/5844455) breakout that will allow USB Type C sink power negotiation. Basically, we can plug into a USB hub or wall wart that can provide up to 20V and request that much voltage. This could be really handy for audio or robotics projects that need 9V, 12V, 15V or 20V without the fuss of finding a...

Visit the Adafruit shop online - http://www.adafruit.com Notes document is available here: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2023/2023-04-10.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm ET/11am PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and li...

Happy Easter from Adafruit 🖤🥚🐰💀🌷🐣🌼🍫 .... DONNIE DARKO MASK By EL_CHINCHIMOYE https://cults3d.com/en/3d-model/art/donnie-darko-mask Printer: CR10 Smart Pro Material: NinjaFlex TPU 85a Speed: 30mm/s Time: 48hr 10mins Size: X:252 Y:218 Z:219mm Layer Height: .2mm layer / .4mm Nozzle 6% Infill / No Retraction Nozzle Temperature: 240C / Bed: 60C Weight: 490g - our commitment to Sparkle Motion ✨...

#circuitpythonparsec How to use use integer divide // to get whole numbers in CircuitPython To learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/...

Tumblr Etched R4 Keycap for MX Compatible Switches (0:09) https://www.adafruit.com/product/5717?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit Feather RP2040 with DVI Output Port - Works with HDMI (0:11) https://www.adafruit.com/product/5710?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit Feather RP2040 with RFM95 LoRa Radio - 915MHz - Rad...

The wonderful world of Python on hardware! Episode 225 (April 5, 2023). This is our weekly Python video highlights! Ladyada and PT review the Python on hardware news of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.it/pohepisodes ***********...

This week's EYE ON NPI will have you tripping all over yourself in a rush to place a Digi-Key order for the Tripp Lite Antimicrobial Surge Protectors (https://www.digikey.com/en/product-highlight/t/tripp-lite/antimicrobial-surge-protectors-for-home-and-office) a range of power extenders that have tons of ports for your home or office workstation. We're used to basic '6 outlet' power extenders, so...

Make a robot friend with Adafruit's CRICKIT - A Creative Robotics & Interactive Construction Kit. Adafruit CRICKIT for Circuit Playground Express https://www.adafruit.com/product/3093 Adafruit CRICKIT for micro:bit https://www.adafruit.com/product/3928 Adafruit CRICKIT HAT for Raspberry Pi https://www.adafruit.com/product/3957 Adafruit CRICKIT FeatherWing for any Feather https://www.adafruit.com/p...

Build a hexagon shaped MIDI device that plays chords using QT Py RP2040 and CircuitPython! This custom PCB features seven CHOC key switches and reversed mounted NeoPixel LEDs. Learn Guide https://learn.adafruit.com/hexpad/overview QT Py RP2040 https://www.adafruit.com/product/4900 Kaih CHOC Key Switches https://www.adafruit.com/product/5114 NeoPixel Reverse Mount https://www.adafruit.com/product/4...

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: X WING By DANDERDRUCKER https://cults3d.com/en/3d-model/game/x-wing-3-versions-print-in-place-no-supports-danderdrucker CR10S Pro V2 Marble PLA 19hr 47mins X:252 Y:218 Z:219mm .2mm layer / .4mm nozzle 6% Infill / 1mm retract 200C / 60C 145g 60mm/s --------------------...

We've searched for FPC cables connectors before on the Great Search (https://blog.adafruit.com/2020/08/02/desk-of-ladyada-when-searching-for-fpc-connectors-its-good-to-be-flexible-adafruit-digikey-deskofladyada-thegreatsearch/) but this time we're going to try to find a specific size: we need a 18-pin 0.5mm pitch bottom-contact connector for use with our EYESPI cables and boards (https://www.adafr...

This week we've got two PiCowbells we're testing - one is our MCP2515 CAN Bus 'bell we designed a few weeks ago. It uses the SSOP version of this chip to stay nice and slim for the narrow Pico footprint. we tested this board successfully using our Feather M4 CAN as the 'other side' - speaking of, we've also been refactoring our CAN/MCP2515 arduino libraries (https://github.com/adafruit/Adafruit_MC...

A short compendium of various diffusion materials to use with NeoPixel LED strips. We tested plastics, fabrics, foam, and papers and have sourced and priced out our favorites. See diffusion clips of LED Foam, fun fur, LED acrylic, fluorescent light diffusions, and more. Learn tips and tricks for diffusion and find your top 5 diffusion materials for your project. Full guide with individual photos a...

In this week's EYE ON NPI, X marks the spot - the spot where you'll learn all about the XMOS XK-AUDIO-316-MC-AB Evaluation Board (https://www.digikey.com/en/product-highlight/x/xmos/xk-audio-316-mc-ab-evaluation-board) and the XMOS XU316 XCORE AI microcontroller that lies within! (https://www.digikey.com/en/product-highlight/x/xmos/xu316-xcore-ai-microcontroller-ics) This is a super powerful micro...

Notes document is available here: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2023/2023-04-03.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm ET/11am PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in...

Ticketmaster and Adafruit Announce Groundbreaking Merger, TicketFruit, to Revolutionize the Purchase of Raspberry Pi 4s New York, NY - April 1, 2023 - Today, global ticketing and event technology platform Ticketmaster and electronics manufacturer Adafruit announced their plans to merge, with a new company, named TicketFruit, marking a pivotal moment in the technology and entertainment industries....

Adafruit 2.7" Tri-Color eInk / ePaper Display with SRAM - Red Black White (0:18) https://www.adafruit.com/product/4098?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts ESP32-H2-MINI-1 Module - 4MB Flash (1:26) https://www.adafruit.com/product/5716?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts ESP32-H2-DevKitM-1 - 4 MB Flash (1:26) https://www.adafruit.com/p...

Retro Tech celebrates Adafruit's love for retro technology. This week it's a celebration of #marchintosh and Apple https://blog.adafruit.com/2023/03/04/marchintosh-is-all-month-long-celebrating-the-macintosh-retrocomputing-community/ Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram:...

The wonderful world of Python on hardware! Episode 224 (March 29, 2023). This is our weekly Python video highlights! Ladyada and PT review the Python on hardware news of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.it/pohepisodes **********...

Spring is in the air here in NYC! Take a look at how some of our boards and kits are made: Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor - STEMMA QT / Qwiic (0:03) https://www.adafruit.com/product/3595 TFT FeatherWing - 2.4" 320x240 Touchscreen For All Feathers (0:09) https://www.adafruit.com/product/3315 Adafruit PyRuler - Engineer Reference Ruler with CircuitPython (0:38) https://w...

The hush-hush news from Adafruit in New York. Broadcast March 29, 2023 These are items or concept products that may/might/could be introduced into the Adafruit store in the future (or not)! It's not out yet, so please don't ask questions or ask when it'll be available.... Check out the Adafruit store for all the great products that are available and for coming soon products you can sign up to be n...

JP’s Product Pick of the Week 3/28/23 RECAP NeoKey BFF #adafruit https://www.adafruit.com/product/5695 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learn...

Build a compact air quality monitor with 3D Printing and CircuitPython. Guide: https://learn.adafruit.com/aqi-case Powered by the Adafruit Feather ESP32-S2 Reverse TFT and a PMSA003I air sensor, this build can monitor air quality in real time! You can even read CO2, humidity and temperatures with a SCD4x sensor. The 3D printed case houses all the components to make a portable environmental monitor...