Adafruit Industries

Pull-up resistors stabilize those otherwise floating inputs #adafruit #collinslabnotes Find resistance at Adafruit: https://www.adafruit.com/category/837 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adaf...

Notes document is available here: (https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2021/2021-08-02.md) Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly happens normally at 2pm ET/11am PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available...

We finally sent out the IS31FL3741 breakout board with the 351 RGB LEDs - and we were thinking it would be fun to turn them into a set of glasses. We'll show how we had PaintYourDragon do a layout design for us and then how we're routing the 1000+ airwires! https://blog.adafruit.com/2021/07/30/large-price-increases-for-silicon-chips-from-official-distributors/ Also we had a short article about off...

Kick back, relax & let your oscilloscope do the math … and fast Fourier transforms #adafruit #collinslabnotes Shop scopes at Adafruit: https://www.adafruit.com/category/638 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on Y...

Join Scott as he answers questions and talks about 7.0.0 fixes. Visit the Adafruit shop online - http://www.adafruit.com 0:00 Getting Started 0:03:20 Hello everyone 0:05:50 how is the stream set up - camera / usb … 0:07:30 deciding factor for the magewell vs. the elgato offerings? 0:08:50 Circuit Python Day - ( next Friday ) 0:12:00 foamyguy - planning to stream at 11am Eastern on CircuitPython da...

When you just wish your oscilloscope would hang back and listen a bit longer – reach for the trigger holdoff #adafruit #collinslabnotes Shop scopes at Adafruit: https://www.adafruit.com/category/638 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit...

Clear Turbine Water Flow Sensor with 3-pin JST (0:10) https://www.adafruit.com/product/5066?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Left & Right Mecanum Wheel Pair - 48mm Diameter - TT Motor or Cross Axle (2-pack) (2:14) https://www.adafruit.com/product/4990?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Seeeduino XIAO Expansion Board - Works With A...

This week's EYE ON NPI is a big time upgrade - we're featuring GAPTEC's LC78 series switching regulator modules (https://www.digikey.com/en/product-highlight/g/gaptec/lc78_3-0-series-switching-regulator) with up to 28V inputs, 95% efficiency and 3 Amp outputs! There's two things we dig about these modules. One, they are pin-compatible with 78xx regulators that we all grew up on. So you can use the...

Ortho keyboard shenanigans! Circuit Python Parsec! Moar!! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ------...

All are welcome, show your 3D printing project, Arduino project, CircuitPython project, Raspberry Pi project, work bench, your work from home desk set up, your cat, your dog, the things your kids made over the last week while home from school. There is no better time to come together, we’ll see you there! and stop by Discord to get the link to join LIVE! Join the Discord https://adafru.it/discord...

ADABOX 019 UNBOXING LIVE Launching in T-minus 10 seconds... Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----...

This week @adafruit we’re making an Emoji keypad using the 1x4 NeoKey and QTPy RP2040. Starting to experiment with resin casting keycaps for What Are You Prototyping. Halloween is approaching so we’re featuring a sweet wolf mask for week’s Timelapse Tuesday! Learn Guide https://learn.adafruit.com/neokey-emoji-keyboard/ Code on GitHub https://github.com/adafruit/Adafruit_Learning_System_Guides/tree...

We use hundreds of thousands of the famed dual BSS138 n-channel FET in every one of our breakouts - we use them for I2C level shifting on our breakouts and QT boards. But, this ultra-jellybean part is suddenly...out of stock everywhere! No worries, lets show how to find a drop-in replacement so we aren't held up on manufacture. See the search results on Digi-Key at https://www.digikey.com/short/5h...

Oscilloscope sweep settings let you control how your scope responds to triggers #adafruit #collinslabnotes Shop scopes at Adafruit: https://www.adafruit.com/category/638 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouT...

SHARP Memory Display 2.7” Monochrome display 400x200 DEEP discount during the livestream here! https://www.adafruit.com/product/4694 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New t...

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! Wolf Mask Todor Kolev https://www.thingiverse.com/thing:4907018 CR10S Pro Black PLA 24hr 47mins X:204 Y:224 Z:180mm .15mm layer / .4mm nozzle 10% Infill / 6mm retract 210C / 60C 171g 50mm/s Visit the Adafruit shop online - http://www.adafruit.com --------------------------------...

A quick rundown of the different trigger modes available on an oscilloscope #adafruit #collinslabnotes Shop scopes at Adafruit: https://www.adafruit.com/category/638 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube:...

Notes document is available here: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2021/2021-07-26.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly happens normally at 2pm ET/11am PT on Mondays. Check the #circuitpython channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in [iC...

8-6-2021 is the Snakiest day of the year and it’s also this year’s CircuitPython Day! The day highlights all things CircuitPython and Python on Hardware. Working with CircuitPython? Tag your projects #CircuitPythonDay2021 on social media and Adafruit will look to highlight them. #circuitpython

Woo it is sweltering, which means we got to stay in and do a bunch of engineering. This week we spent a little time finishing up some languishing boards - Stemma QT version of the SCD40/SCD41 and IS31FL3741 chips - we wrote libraries for both as well! We also are dealing with a massive SAMD51 shortage by redesigning some recent boards like the Matrix Portal to be S2 only (so at least there's only...

Surface mount meets through hole courtesy of a few header pins #adafruit #collinslabnotes Shop tack flux at Adafruit: https://www.adafruit.com/product/2667 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://ad...

Join Scott as he answers audience questions and squashes bugs for CircuitPython 7.0.0. Scott is sponsored by Adafruit to work on CircuitPython. Support them, and by extension Scott, by purchasing hardware from https://adafruit.com Chat with Scott and lot of others on the Adafruit Discord at https://adafru.it/discord. Deep Dive happens every week. Normally Fridays at 2pm Pacific but occasionally sh...

The wonderful world of Python on hardware! Episode 142 (July 21, 2021). This is our weekly Python video-newsletter-podcast! Ladyada and PT review the Python on hardware news & highlights of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.it/po...

3 x 1U and 2 x 1.25U "Ctrl" Silicone Keycap Molds - MX Compatible Switches (0:13) https://www.adafruit.com/product/5079?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 2 x 2.25U, 1 x 2.75U and Space Bar Keycap Mold - MX Compatible Switches (0:13) https://www.adafruit.com/product/5080?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 4 x 1U and 1 x 1.5U "Caps L...

The split power rail is an easily overlooked feature/nuisance of many solderless breadboards. #adafruit #collinslabnotes Shop breadboards at Adafruit: https://www.adafruit.com/category/462 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe...