Adafruit Industries

RFID Wiz Kit by Smooth Technology (0:12) https://www.adafruit.com/product/5402?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts ADXL343 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI - STEMMA QT / Qwiic (1:59) https://www.adafruit.com/product/4097?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit QT Py ESP32-S2 WiFi Dev Board with STEMMA QT (3...

Adafruit PCBs small to large (0:04) Selective Solder machine with back panel temporarily removed (0:32) Selective soldering RGB Matrix Bonnets (0:46) https://www.adafruit.com/product/3211 CyberDecks stacked and waiting to go into selective solder (1:08) https://www.adafruit.com/product/4862 https://www.adafruit.com/product/4863 Reel of distance sensors for the VL53L0X Time of Flight Distance Senso...

JOHN PARK'S WORKSHOP LIVE 3/3/22 IR Remote + Composite Video Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ---...

This week's EYE ON NPI is from a supplier that will challenge your expectations! It's Challenge Electronics' IP68/IP65 Waterproof Battery Holders (https://www.digikey.com/en/product-highlight/c/challenge-electronics/ip68-ip65-waterproof-battery-holders) A series of durable, waterproof battery cases that will do great at powering your board even in intense dusty and wet conditions! Challenge Electr...

The news from Adafruit in New York. Broadcast March 2, 2022 https://www.adafruit.com/new These are items or concept products that may/might/could be introduced into the Adafruit store in the future (or not)! It's not out yet, so please don't ask questions or ask when it'll be available.... Check out the Adafruit store for all the great products that are available and for coming soon products you c...

Vaporwave Dali clock running on Feather ESP32 v2 is rad on the 13” Sony CRT John Park found on the side of the road. DAC output to composite video! Created by to Marcio T. https://github.com/marciot/esp32-dali-clock based on @bitluni and @rossumur graphics code. Tweaks by @todbot & @johnedgarpark Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIV...

SHOW and TELL 3/2/2022

The Allwinner F1Cx00S series of chips are famous for being "$2 linux-on-a-chip" with DRAM built in - all you need is some passives, a crystal, and SPI NOR flash memory to have a miniature booting linux board. It's not very fast, and it's not very powerful but maybe we could run minimal python scripts on it? we've never used this chip but we used to noodle with openwrt and this seems kinda similar....

ASK AN ENGINEER 3/2/2022 LIVE! #adafruit #AskAnEngineer #diy Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ---...

This week @adafruit we’re making a sketch drawing device with CircuitPython. Prototyping zipper pulls using glow-in-the-dark powder. The timelapse this week is a ramp walking robot printed in MatterHackers Quantum PLA filament. Mechanical! YouTube Video https://youtu.be/0M7IT2ROX84 Learn Guide https://learn.adafruit.com/sketch-drawing-toy/ Code on Github https://github.com/adafruit/Adafruit_Learni...

For our Atari Video Music machine mod, we want to add an S-Video output port. S-Video splits the signal from NTSC into chroma and luma, so the signal tends to be clearer and more stable. Thankfully, the chip in the AVM gives us the chroma and luma on separated pins, so we just have to wire them up to a standard S-Video connector. Let's see how we can find one that will perfectly fit on the AVM wit...

Build a sketch drawing toy using CircuitPython and 3D Printing! Use the Feather M4 and 2.4in TFT FeatherWing to make a portable sketch drawing hand held device. Use knobs to move the cursor and flip the toggle switch to pen up or down and use the button to clear the display. This uses Display IO in CircuitPython to draw pixels on the TFT display. Learn Guide https://learn.adafruit.com/sketch-drawi...

The non-TFT version of the ESP32-S2 Feather has been out of stock for a few weeks because we made a design error in rev B and want to fix it before putting back in the shop. We used a P-Channel FET to enable/disable the Stemma QT / I2C power but kept the pullups connected to 3.3V (this was on purpose because the onboard LC709 battery monitor is powered from the battery and this would let you read...

JP’s Product Pick of the Week 3/1/22 7-Segment Display STEMMA QT https://www.adafruit.com/product/880 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learni...

JP’s Product Pick of the Week 3/1/22 7-Segment Display Backpack DEEP discount during the livestream here! https://www.adafruit.com/product/880 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subsc...

Ramp Walking Toy NemoMK2 https://cults3d.com/en/3d-model/gadget/walking-nemo-mk2 CR10S Pro Quantium PLA 3hr 32mins X:163 Y:153 Z:62mm .2mm layer / .4mm nozzle 6% Infill / 6mm retract 210C / 60C 38g 60mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http:...

Link to the notes document - Notes document is available here: (https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2022/2022-02-28.md) Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly happens normally at 2pm ET/11am PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meet...

Washington Square Park - Sunday, February 27, 2022 🇺🇸 🇺🇦

We had been working on a lot of camera support for CircuitPython. We're getting back to that project now with an all-in-one DIY camera board with an OV5640 camera module and an ESP32-S2. You really do want PSRAM to buffer large images like 1440p JPEGs for saving to disk. One thing that we bumped into is that SD cards can be very finicky when initialized into SPI mode on a shared bus, but we found...

What's the best CD to play on the Star Trek Deep Space Nine Defiant audio CD player? If you guessed Star Trek: Deep Space Nine - The Emissary [CD] Music composed by Dennis McCarthy, you were correct! :) http://store.gnpcrescendo.com/new/product_info.php?products_id=31 #deepspacenine #startrek #defiant

jepler ended the week on a high note, getting the motor of an Apple ][ floppy drive moving back and forth with CircuitPython! It's part of our quest to make Adafruit_Floppy work with non-PC floppy disk drives. The simple code making this happen can be found in a GitHub gist: https://gist.github.com/jepler/16cdb13d8c3298c392d789772a56d177 For this step, +5 and +12V supplies are required, coming fro...

#circuitpythonparsec How to move screen shapes with DisplayIO. To learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on th...

Join Scott as he answers questions and further discusses the USB Host API for CircuitPython. Next week will be on Friday at 2pm Pacific and be the last stream with Scott as host for a while. Foamyguy will stream in the time slot starting in two weeks. Join the Discord at https://adafru.it/discord All notes for Deep Dives are available at https://github.com/adafruit/deep-dive-notes 0:00 Getting Sta...

The wonderful world of Python on hardware! Episode 170 (February 23, 2022). This is our weekly Python video-newsletter-podcast! Ladyada and PT review the Python on hardware news & highlights of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.i...

26-pin 1mm pitch FPC Flex Cable - 20cm long (0:10) https://www.adafruit.com/product/5386?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit 1.47" 320x172 Round Rectangle Color IPS TFT Display - ST7789 (0:30) https://www.adafruit.com/product/5393?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit VL53L4CD Time of Flight Distance Sensor - ~1 to 130...