HVAC School - For Techs, By Techs

In today's podcast, Bryan and a team of Mitsubishi Electric Trane HVAC US (METUS) managers (Mike Schaefer, Charles Miltiades, and Sly Grimm) discuss mini-split controls strategies. Some contractors misunderstand what mini-splits are. Mini-splits CAN be ductless, but not all of them are ductless. Mini-split systems also have handheld controls, but those are not the only control options for mini-spl...

In today's short podcast, Bryan discusses the key factors for system performance WITHOUT doing a deep dive into system commissioning. "Performance" refers to system efficiency, capacity, air filtration/cleanliness, longevity, and the ability to match the latent and sensible loads of a space. System airflow is the main performance factor to consider. To determine proper airflow (CFM), consult Manua...

In today's podcast, Trevor and Bryan discuss Copeland Scroll Compressor Multiples for Air Conditioning. "Multiples" refer to equipment setups with multiple compressors that have connected suction and discharge lines, so they resemble parallel rack refrigeration setups. Multiples typically come in tandem (2) or trio (3) sets. Compared to having a single giant compressor, multiples are more efficien...

In today's short podcast, Bryan clears up the differences between markup and profit margins in HVAC businesses. The number one mistake that people make in business is confusing markup and gross margin. For example, you can double the price of a $50-part and sell it for $100. That would be a 100% markup. However, your gross margin is NOT 100%; your gross margin is only 50%; you only made a 50% prof...

In today's podcast, Eric Mele and Bryan explain the planning, layout, and execution of HVAC projects. They mostly cover commercial ductwork but also touch on piping and some residential projects. Planning The first step is to review the construction plan WITH a site visit. It is best to see how a plan works within the space; plans may be feasible on paper but may not work out as planned in the act...

In today's short podcast, Bryan explores the differences between startup and commissioning. Startups typically involve going in during the construction phase after the drywall has been sealed up. (Vents, ducts, and copper piping typically go in before the drywall.) A technician can then perform a startup. The startup includes testing the drain line, checking the charge, checking for leaks, and see...

In today's podcast, Eric Kaiser and Bryan talk about mentorship in the HVAC industry. They discuss what it means to be a good mentor, how to find a good mentor, and what it means to be mentored.  Mentorship is an organic process. Most mentees don't go up to someone they respect and formally ask that person to be their mentor. Respect is the foundation of the mentor-mentee relationship; formal ment...

In today's podcast, Bryan explores the upsides of choosing a career in the skilled trades instead of going to college. He also covers ways to prepare your child for a trades education and career while they are still deciding what to do with their lives. When we think about what we want for our kids, the following goals come up quite often: purpose, financial upside and reward, freedom from debt, a...

In today's short podcast, Bryan explores triple evacuation. Many people believe that we don't like triple evac, but that's simply NOT true. We're here to set the record straight. If the manufacturer tells you to follow triple evacuation processes, then it's a good idea to do what they say. We won't argue with that. However, our argument is that the procedure can be more time-consuming than it's wo...

In today's podcast, Bryan explains how he teaches physics. He believes that teaching physics is about continuously building a mental model, and he covers the methods and mindsets that facilitate that learning style.  The basic Wikipedia definition of physics states that it is a science that deals with matter, energy, and their interactions. Even then, we can simplify "matter" to "stuff." Simplific...

In today's short podcast, Bryan explores the dangers of cold tanks during refrigerant recovery. Whenever you have a recovery tank, you only want to fill it to 80% capacity in the liquid state. The same goes for all sorts of vessels (coils, etc.).  However, capacity isn't the only factor to consider for safety. We need to know what our maximum temperature will be. You will be in greater danger of o...

In today's podcast, Nikki and Bryan discuss dehumidification. They cover the relationship between cooling and dehumidification, humidity control, and dehumidifier installation practices. If the A/C unit is the king, the dehumidifier is the queen. The A/C unit controls cooling and humidity, but it can only do so much. A dehumidifier helps the A/C manage comfort under more demanding conditions. Many...

In today's podcast, Trevor and Bryan discuss how to troubleshoot thermostatic expansion valves (TXVs/TEVs). They also dive into the various types, applications, and components of TXVs. TXVs are metering devices that control evaporator superheat to protect compressors from harm. Controlling heat also regulates pressure, which improves efficiency and prevents issues like floodback and overheating. T...

In this short podcast episode, Bryan discusses push-pull recovery, how it works, and what we need to know about it. Push-pull recovery is a somewhat counterintuitive method of recovering liquid rapidly. We simply do that by pulling refrigerant out of the system and pushing it into the tank. However, when we pack refrigerant into a tank, the tank pressure and temperature increase. So, it can be mor...

In this short podcast episode, Bryan goes over one of his most valuable tips for pulling a vacuum on a small system. It can be very difficult to pull a vacuum on a small system, especially when you're dealing with a low-temperature application like a freezer. When you pull a vacuum, you're creating a low-pressure area that affects molecule behavior. So, you're creating a situation where the molecu...

In this podcast episode, Bryan and Eric Mele explain how HVACR technicians can END callbacks with a few best practices. Rushing through calls will often lead to callbacks. One of the most common mistakes techs make is failing to check the condensate drain before walking away from a job. To end callbacks, technicians would be wise to check the entire system and note any possible problem areas; in c...

In this podcast episode, Bryan and Eric Mele discuss the diagnosis and prevention of compressor overheating in HVAC and refrigeration. The main causes of compressor overheating are inadequate cooling back to the compressor, low charge, restrictions, and sometimes even poor suction line insulation. We want to keep the suction temperature low while maintaining appropriate superheat. If the suction l...

In this short podcast episode, Bryan and Eric Mele talk about re-tapping transformers for single-phase equipment in 208v applications. Most single-phase equipment can work for 230v or 208v, meaning that they can operate with low voltage. However, we typically see 208v in commercial buildings. The sine waves of 208v equipment are 120 degrees out of phase, not 180 degrees (as in split-phase applicat...

In this podcast episode, Ben Reed from TZOA, a disruptive air technology brand, joins us to discuss the indoor air quality map and compass. We spend a majority of our lives indoors, so TZOA tries to improve IAQ in homes to keep us healthier. HVAC manages airborne chemicals, so indoor air quality ties right into our industry; HVAC technicians will become more valuable when they become well-versed i...

In this podcast episode, Bryan and Trevor Matthews of Emerson Canada discuss the Copeland 2-stage ZPS scroll compressors. Please join us by following along in bulletins AE4-1428 and AE4-1365 . The ZP91KCE to ZP143KC Copeland compressors don't have internal pressure reliefs (IPRs). Those higher-pressure compressors make very loud noises when they go off, and it'll blow hot discharge gas on the inte...

In this podcast episode, Bryan, Trevor Matthews, and Jim Dick of Emerson talk about the screw compressor and how it works. This time, they focus on the Vilter single-screw compressors. Vilter is an industrial compressor division of Emerson (compare to Copeland). Vilter also makes reciprocating compressors, but the screw compressor is its claim to fame; you may want to consider using a screw compre...

In this short podcast episode, Bryan talks about condensation and how HVAC technicians can solve condensation-related problems. He also discusses humidity control and how that can affect sweating. We may have heard the phrase, "Condensation is where hot meets cold." That's not necessarily true; while it may seem that sweating happens where hot meets cold, the dew point is the main cause. We won't...

In this podcast episode, Bryan and Chris Mohalley of Regal Beloit discuss the different types of ECM. They also cover applications where you can expect to find ECMs. In the HVAC industry, we typically use three types of motors: constant-torque, constant-airflow, and constant-speed. Every ECM works on electronic commutation, so constant-torque motors use that to maintain torque output (X13). The co...

In this podcast episode, Bryan and Eric Kaiser discuss the right and wrong way to do HVAC/R jobs and approach HVAC/R work. Breaking things down into "right" and "wrong" categories is a rather simple way to approach a problem; we throw nuance and alternatives out the window, which can be worse than doing something "wrong." Instead of viewing things as right and wrong, we would be better off if we l...

In this podcast episode, Bryan and Chris Mohalley from Regal Beloit discuss EC motors. They also describe ECM applications and how those motors work. EC motors (ECMs or "ECM motors") are electronically commutated motors. These motors are generally three-phase AC motors operated by a drive; that drive is a combination of an AC-to-DC converter, microprocessor, and frequency drive. So, the frequency...